Micro Image Intake Manifold thread

[cali yaris]

The dyno showed +7 whp and torque, not 5 as posted above. On a 100% stock car. Other mods will help more, as others have posted.

$100 per horsepower is very much in line with what you get from intakes, exhausts and the like. There's no magic bullet for power, unless you go turbo.

Further, we haven't seen any change in intake temps with the manifold. Customer feedback on this will be appreciated (those of you with ScanGauges, etc.)

As for the budget or buying considerations - can't help ya there.

[tooter]

Originally Posted by cali yaris

The dyno showed +7 whp and torque, not 5 as posted above.

Hey Garm,

Nice production run!

The +7 torque is obvious at about 3,200 and 3,600... but at what rpm is there +7 hp?



I see close to +5hp at about the same rpms as the two torque peaks, and another peak close to +5hp at 4,500. Those are very good numbers especially how they're distributed.