Cv joint replacement 07 2dr/sway bar end links

[Garth g.]

Thanks for the info. I have surtrack ones on there right now, I checked it again today it's dry? It's not clicking when I turn I might just drive it until it gives. I'm going to change stabilizer links today noticed when I did front pads and rotors that they need to be done. When you bought stuff to rebuild the cv joint what brand did you use? While I'm on here, my airbag light is on would that be the clock spring?

[Garth g.]

Sorry CT. Scott misunderstood what you were telling me earlier, I think the next time I have to change them I'll try a different after market axle from rock auto. They stock a lot of stuff way cheaper than the stores in Canada and a lot of times it's the same brands. Saved a good chunk of cash so far going with them.

[CTScott]

Originally Posted by Garth g.

Thanks for the info. I have surtrack ones on there right now, I checked it again today it's dry? It's not clicking when I turn I might just drive it until it gives. I'm going to change stabilizer links today noticed when I did front pads and rotors that they need to be done. When you bought stuff to rebuild the cv joint what brand did you use? While I'm on here, my airbag light is on would that be the clock spring?

For the CVs, I bought the full Axle assembly, with the CV's and boots all together.

For the SRS issue, it is likely the clockspring, but you can use this procedure to read the code to be sure:

http://www.yarisworld.com/forums/sho...d=1#post557473

[crumbs]

Originally Posted by CTScott

For the CVs, I bought the full Axle assembly...

Hey do you know what brand aftermarket cv axle you bought? I was looking at GSP NCV69452 & NCV69451 from Rock Auto.