Dashboard Clock goes off?

[lespaulstd]

I am facing the same issue and will try to replace the clock from a donor cluster. In order to test the "new" cluster, can somebody point me the pinout of the connectors to be able to switch it on and see if the clock works?

It is an European Yaris, and part-number is 83800-0D660

Originally Posted by CTScott

That is the one that I have. I just disassembled mine and hooked it up on my test bench to experiment with it. The clock and odometer are a separate assembly from the rest of the instrument cluster. Does anything at all display on the clock area of yours?

Attachment 50263

Thanks in advance

[GTJos]

Hi all !
Same problem (for over a year now...)
Happy to find this forum/threat. Are there any real solutions yet ? Thank's in advance !

[lespaulstd]

Originally Posted by lespaulstd

I am facing the same issue and will try to replace the clock from a donor cluster. In order to test the "new" cluster, can somebody point me the pinout of the connectors to be able to switch it on and see if the clock works?

It is an European Yaris, and part-number is 83800-0D660




Thanks in advance

Searching this document from this post of CTScott I've been able to check that the donor cluster works.

It is only necessary to connect, pins 1 (12V) and 24 (GND) to power the unit outside of the vehicle. Now my plan is to swap the clock/temperature display of both units.