Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Performance Modifications
  The Tire Rack

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-20-2007, 05:04 PM   #15
joey1320
 
joey1320's Avatar
 
Drives: Yaris LB
Join Date: Mar 2007
Location: Lakewood, Ohio
Posts: 538
Quote:
Originally Posted by Joker View Post
Less backpressure is better, NONE is not...by putting 2 1/2" pipe on any of our normally aspirated cars is overkill in every sense of the word. If you think your car is slow now go ahead and try it.....

To clarify I assume when you say "no header at all" you mean the engine was tested w/its stock exhaust manifold? The only other meaning would be the car had no exhaust manifold at all, esentially running the cylinder head "open" which makes no sense.

A header w/a good design should make some gains on our cars, when I say good design that doesnt mean the 4 into 1 DC header that recently came out. 4 into 1's are for higher (5000+ rpm) applications which means on the lower end your dead...unless of course you drive around at or near redline all day. Do some research, DC's own website highlights this fact!

Just trying to help out the inexperienced. Peace.....

T
no i meant no header/manifold at all. just open exhaust out of the head.
i'll try to find the mag. around the apartment somewhere but not sure if it will still be around, since its an old mag.

and yes they did make more whp/tq with nothing connected to the head... i'm not a designer/engineer so i'm not sure as to how/why but it did...
joey1320 is offline  
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:48 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.