Seeking wheel advice from someone who KNOWS

[09TRD]

Originally Posted by Russelt3hPirate

...Enkei RPF1s are sub 10lbs if you don't want to spend big $$ on wheels.

That's a gravity cast wheel with very thin spokes.

That wheel wouldn't hold up on the roads here in the Northeast.

While it's heavier, the forged and polished Centerline is a vastly stronger, higher quality wheel.

[Tamago]

Originally Posted by 09TRD

That's a gravity cast wheel with very thin spokes.

That wheel wouldn't hold up on the roads here in the Northeast.

While it's heavier, the forged and polished Centerline is a vastly stronger, higher quality wheel.

ok, so you're set on the centerline.. let's drop it because we think you're wrong and you think we're wrong.. you're going to a wheel that's about the same weight as stock steelies

your offset will be fine..
you have the correct hub bore
stick to that low section width 205

i'm out..

[09TRD]

Originally Posted by Tamago

ok, so you're set on the centerline.. let's drop it because we think you're wrong and you think we're wrong.. you're going to a wheel that's about the same weight as stock steelies

your offset will be fine..
you have the correct hub bore
stick to that low section width 205

i'm out..

The wheel I'm talking about that weighs 15 pounds is a 17" diameter wheel.

They don't list the weight for the 15" version, though it would obviously be lighter:

http://centerlinewheels.com/wheels_d...d=36&sw_id=263 "Our 17" wheel weighs only 15 lbs!"