03-26-2009, 03:20 AM
|
#10
|
Drives: Vitz RS 1.5
Join Date: Feb 2009
Location: Japan
Posts: 66
|
Quote:
Originally Posted by CTScott
Actually, Japan may be a better place to start. Here are the parts that I believe are needed for the conversion (if you could check on pricing/availability for us):
55900-0D210-B0 Control Assy, Air Conditioner
(This is the entire center dash assembly including the "knobs", electronics, and trim)
87106-0D020 Servo Sub Assy, Damper (For Airmix)
87106-0D040 Servo Sub Assy, Damper
87106-0D030 Servo Sub Assy, Damper (For Mode)
(These three replace the manual dampers with ones which are controlled by the above part)
82212-52020 Harness Assy, Air Conditioning, LHD
(I believe that this is the entire cable assembly, including connections to the above and below parts)
88625-47031 Thermistor Cooler (Solar Sensor)
(Sensor mounted under upper dash)
(This part is available in the US, as it is used on many other cars)
88625-22131 Thermistor Assy
(Sensor mounted in front bumper)
88625-47021 Thermistor, Cooler
(Sensor mounted behind AC controls)
(This part is available in the US, as it is used on many other cars)
88650-0D160
(This is the AC control module, which is mounted to the bottom of the AC assembly)
|
Ok. I am calling them next week, so will get back to you.
This is what you want right ??
Last edited by FEINT; 03-26-2009 at 03:37 AM.
|
|
|