would 16x8 with +25 offset fit on the rear? - Toyota Yaris Forums

marcus · 06-23-2009, 01:58 PM

would 16x8 with +25 offset fit on the rear without rubbing when car is full?

Tamago · 06-23-2009, 02:00 PM

what tire?

i'm wagering NO, not without some camber added or some fenders pulled.

AlainMikli · 06-23-2009, 02:26 PM

NO!!

I have 16x7 +42 offset all around, 15mm spacer on rear, stock camber on rear, front should be like 0.5 more than stock.

I already rub the front in full turn

I rub the rear in some small bump, even with no passenger!!

I've try e passenger with me at the same time, super rub even on local...

I think you have to run a large camber..if you want to run 16x8....

but still need to see how low you are

marcus · 06-23-2009, 02:30 PM

thanks...so 16x7 +40 on the rear its safe to put 10mm spacers to get zero rub even when full but i may be runnign 195 on the tires. assuming u got 205s

Tamago · 06-23-2009, 02:46 PM

Quote:

Originally Posted by marcus

thanks...so 16x7 +40 on the rear its safe to put 10mm spacers to get zero rub even when full but i may be runnign 195 on the tires. assuming u got 205s

yes, an effective +30 and a 195 tire you'll be fine with a X7 width

AlainMikli · 06-23-2009, 06:21 PM

I'll rub the front a little bit, when I push it hard in some corner, but you should be fine if you run some 195 tires

marcus · 06-23-2009, 06:25 PM

im thinking of staggered set up front 16x7 +40 offset and then rear 16x8 +25 offset car is in trd spring but may switch to df210 later on. plus camping month the car get full so i dont want rubbing on the fenders..

kngrsll · 06-23-2009, 06:54 PM

i have 15x7 +25, no rub. i could actuall use a spacer in the rear (i have some camber too)

WeeYari · 06-23-2009, 07:04 PM

Quote:

Originally Posted by marcus

im thinking of staggered set up front 16x7 +40 offset and then rear 16x8 +25 offset car is in trd spring but may switch to df210 later on. plus camping month the car get full so i dont want rubbing on the fenders..

Switch to DFs and you won't have a hope in hell of avoiding a rub. Most likely going to happen on the current TRDs.

BTW - this is your 3rd 'rub' thread isn't it?

AlainMikli · 06-23-2009, 07:07 PM

here is some pic of mine, 16x7 +42, 15mm spacer in the rear

if you run 16x8 +25...you should be (0.5"+2mm) more flush than mine at the rear.....

i think you should be rub when your car get full.....

(with the stock camber)

AlainMikli · 06-23-2009, 07:12 PM

Quote:

Originally Posted by WeeYari

Switch to DFs and you won't have a hope in hell of avoiding a rub. Most likely going to happen on the current TRDs.

BTW - this is your 3rd 'rub' thread isn't it?

he just don't want to get rub

marcus · 06-23-2009, 07:15 PM

Quote:

Originally Posted by WeeYari

Switch to DFs and you won't have a hope in hell of avoiding a rub. Most likely going to happen on the current TRDs.

BTW - this is your 3rd 'rub' thread isn't it?

maybe the 3rd ..sound about right but really i havent got the rims..i was ready to get them but local dealer cancelled with drag wheels due to shipping issues so im back to the drawing board..now a dealer offered me staggered rims so im trying to figure this out..its good for others as well.. all i know so far.. 16x7's zero rub on +40 offset assuming u used 195's/50/16..for the front.

but the way the rubbing issue is on the side of the fender..so trd or df210 should not make a difference if u got the right offset and tire size.. 2 person on the back on the trds tucks the tire on the fender..just like that.

AlainMikli · 06-23-2009, 07:24 PM

i'm not lowered by spring, so may be yours are little bit higher than mine, but softer....

marcus · 06-23-2009, 07:29 PM

i find trd / eibach pro kit i believe really soft..which maybe a good thing most of the time.

Thirty-Nine · 06-23-2009, 08:29 PM

Sorry to nitpick, but shouldn't this be in the wheel/tire area?

etheliters · 09-15-2009, 04:43 PM

I'm interested as I'm putting 16x8 on rear of my lb. Pretty sure I'm gonna roll the fenders. How much should it cost?

06-23-2009, 01:58 PM	#1
marcus toyota View User's Garage Drives: 2007 Yaris RS Blazed Join Date: Oct 2006 Location: toronto, canada Posts: 3,637	would 16x8 with +25 offset fit on the rear? would 16x8 with +25 offset fit on the rear without rubbing when car is full?

06-23-2009, 02:26 PM	#3
AlainMikli Drives: ings 09 Yaris 3 Door LiftBack Join Date: Mar 2009 Location: SF, CA Posts: 465	NO!! I have 16x7 +42 offset all around, 15mm spacer on rear, stock camber on rear, front should be like 0.5 more than stock. I already rub the front in full turn I rub the rear in some small bump, even with no passenger!! I've try e passenger with me at the same time, super rub even on local... I think you have to run a large camber..if you want to run 16x8.... but still need to see how low you are __________________ REAL JDM ings+1 Full Body Kit…REAL JDM C-One Spoiler…Retrofit Projector Headlight…Kiddo 6-pots BBK…CE 28N J-Time Attack…Bride Ergo II Racing Seat…Personal Steering Wheel…Work Bell Quick Release…Dealer Option Sun Roof…JDM RS LED Side Mirror…JDM RS Taillight…C-One Oil Cap…C-One Radiator Cap…TRD Iridium Racing Spark Plug…Tom's Fuel Map Controller…Blitz throttle controller…GReddy Informeter Touch…MR Suspension…TRD Rear Sway Bar…MR C-Pillar Bar…GTspec Front Strut Bar & Rear Strut Bar…AFE Intake…WR Header…Nitto Mid-Pipe…Greddy Ti-C axleback…Goodridge SS Brake Line… To do: Supercharger…

06-23-2009, 06:21 PM	#6
AlainMikli Drives: ings 09 Yaris 3 Door LiftBack Join Date: Mar 2009 Location: SF, CA Posts: 465	I'll rub the front a little bit, when I push it hard in some corner, but you should be fine if you run some 195 tires __________________ REAL JDM ings+1 Full Body Kit…REAL JDM C-One Spoiler…Retrofit Projector Headlight…Kiddo 6-pots BBK…CE 28N J-Time Attack…Bride Ergo II Racing Seat…Personal Steering Wheel…Work Bell Quick Release…Dealer Option Sun Roof…JDM RS LED Side Mirror…JDM RS Taillight…C-One Oil Cap…C-One Radiator Cap…TRD Iridium Racing Spark Plug…Tom's Fuel Map Controller…Blitz throttle controller…GReddy Informeter Touch…MR Suspension…TRD Rear Sway Bar…MR C-Pillar Bar…GTspec Front Strut Bar & Rear Strut Bar…AFE Intake…WR Header…Nitto Mid-Pipe…Greddy Ti-C axleback…Goodridge SS Brake Line… To do: Supercharger…

06-23-2009, 06:54 PM	#8
kngrsll Apexing Egg!! Drives: 07 Toyota Yaris white hatch Join Date: Oct 2006 Location: Spartanburg, SC Posts: 872	i have 15x7 +25, no rub. i could actuall use a spacer in the rear (i have some camber too) __________________ HighTach Motorsports 2007 Toyota Yaris-ARGH!! Mods: Tokico HTS, 6.6 kg F, 6.1 kg R custom springs, 23 mm RSB, 2-way TRD LSD, 15x7 +25 Team Dynamic wheels, 195/55/15 Dunlop Star Specs, Cobra Suzuka S

06-23-2009, 08:29 PM	#15
Thirty-Nine Small cars are a big deal View User's Garage Drives: 2007 Yaris Liftback Join Date: Feb 2006 Location: Portland, OR Posts: 3,144	Sorry to nitpick, but shouldn't this be in the wheel/tire area? __________________ Subcompact Culture: The Small car blog

06-23-2009, 02:30 PM	#4
marcus toyota View User's Garage Drives: 2007 Yaris RS Blazed Join Date: Oct 2006 Location: toronto, canada Posts: 3,637	thanks...so 16x7 +40 on the rear its safe to put 10mm spacers to get zero rub even when full but i may be runnign 195 on the tires. assuming u got 205s

06-23-2009, 06:25 PM	#7
marcus toyota View User's Garage Drives: 2007 Yaris RS Blazed Join Date: Oct 2006 Location: toronto, canada Posts: 3,637	im thinking of staggered set up front 16x7 +40 offset and then rear 16x8 +25 offset car is in trd spring but may switch to df210 later on. plus camping month the car get full so i dont want rubbing on the fenders..

06-23-2009, 07:24 PM	#13
AlainMikli Drives: ings 09 Yaris 3 Door LiftBack Join Date: Mar 2009 Location: SF, CA Posts: 465	i'm not lowered by spring, so may be yours are little bit higher than mine, but softer....

06-23-2009, 07:29 PM	#14
marcus toyota View User's Garage Drives: 2007 Yaris RS Blazed Join Date: Oct 2006 Location: toronto, canada Posts: 3,637	i find trd / eibach pro kit i believe really soft..which maybe a good thing most of the time.

09-15-2009, 04:43 PM	#16
etheliters Drives: 07 yaris hatch Join Date: Jul 2009 Location: houston Posts: 146	I'm interested as I'm putting 16x8 on rear of my lb. Pretty sure I'm gonna roll the fenders. How much should it cost?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
16x7 +38mm front, 16x8 +0 rear WILL IT FIT?	wildmongoose26	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	28	02-23-2014 12:04 PM
When will the Yaris hit the showrooms at dealers?	Petrolhead	New YARIS Purchase Forum	181	11-28-2011 08:03 AM
Consumer Reports not too pleased with Yaris	Befuddled	General Yaris / Vitz Discussion	132	02-28-2011 03:57 PM
Rim Weights	bosbik	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	16	11-14-2009 07:42 PM
Ultra Racing 23mm Rear Stabilizer Bar	Loren	Performance Modifications	62	05-18-2009 08:20 PM