Can we do this? (aka The DIY Cruise Control Thread)

[texkid]

Originally Posted by CTScott

That will work.

That listing doesn't have a part number listed, but the correct part number is: 84632-34011

On the Camrys the same stalk as the Yaris one was used from 04 to 09.

In the picture on that listing the wire that goes from the switch to the connector on the spiral cable is missing. Part number for the wire is 84633-42030 and it goes for about $30 from the dealer.

Thank you very much. I just made an offer to the seller. In the meantime I will keep on looking around to see what else i can find.

Added Note:I was just on TRDSparks.com, their website is stating that part number 84633-42030 is being replaced with part number 84633-02020. I am not sure if that is correct so I thought I give ya'll a heads up.

[CTScott]

Originally Posted by texkid

Thank you very much. I just made an offer to the seller. In the meantime I will keep on looking around to see what else i can find.

Added Note:I was just on TRDSparks.com, their website is stating that part number 84633-42030 is being replaced with part number 84633-02020. I am not sure if that is correct so I thought I give ya'll a heads up.

84633-02020 is shown in the EPC as being for the 08-09 Corolla and Matrix, but perhaps it is the same, so they are merging the two part numbers.

By the way, in looking for stalks, ones from the following vehicles are all the same:

Camry 04-09
ES300 04-09
Scion TC 04-09
Sequoia 04-09
4Runner 04-09
Corolla 08-09
ES350 06-09
FJ 06, 08
GS450H 06-09
GX470 04-09
Highlander 04-09
IS F 07-09
IS250 05-09
Land Cruiser 04-09
LX470 04-09
LX570 07-09
Prius 04-09
RAV4 04-09
RX330 04-09
RX400H 05-09
Scion xB 07-09
Scion xD 07-09
Tundra 04-09


The 84633-42030 wire is supposedly only used on the following vehicles:
Corolla 08-09
RAV4 05-08
Yaris 06-09

[Vince87]

Just drove to work with my newly working cruise control, this is amazing ! thanks a hundred times CTScott ! So it's now confirmed that the mod works on the Canadian model of the yaris (mine is a 07 MT liftback)... Next step is to install the Clutch Switch and the On/Off LED !