Free Penguin with spacer purchase ! - Page 4 - Toyota Yaris Forums

Penguin Garage · 06-18-2009, 12:35 PM

Pics!! :D

lilredrocket · 06-18-2009, 12:50 PM

Haha! Talked my boss into letting me do them at work. Working on a car is so much easier when you have a lift! Ill have to take pics when I get home sorry they won't be before and after.

Penguin Garage · 06-18-2009, 01:15 PM

it's all good, I just like seeing pics of Yari with proper fitting wheels!

whooppee777 · 07-27-2009, 11:41 PM

which spacer with these wheels

monarch nilo 16x8 +20 offset 215/45/16

planning ahead of time, dont have tires for them yet. already planning on pulling and rolling fenders. just curious as to whether i could get away with the 13mm spacer

marcus · 07-27-2009, 11:52 PM

Quote:

Originally Posted by PETERPOOP

Got mine in! Quick shipping and free to hawaii! Can't beat both of those factors. Here are mine!

205/50/16/ 16"x7" +42 offset w/ Penguin Garage 13mm spacers!

any rubbing when fully loaded??

Penguin Garage · 07-28-2009, 11:47 AM

Quote:

Originally Posted by whooppee777

which spacer with these wheels

monarch nilo 16x8 +20 offset 215/45/16

planning ahead of time, dont have tires for them yet. already planning on pulling and rolling fenders. just curious as to whether i could get away with the 13mm spacer

well, that's a really low offset and a wide tire.

you're going to have to do some work to get that fit as is, going with our hubspacers before you do the install will allow you to do the required mods to make it fit.

a little extra pull and our camber shims will round out the car nicely.

you may want to go with the 10mm spacer although if you're looking for a much more aggressive stance the 13mm would do it.

either way spacer or no spacer you've got a lot of work to do

hopefully we'll be testing some 15x8 +20mm front and 15x8 +10mm rear wheels soon. :)

Tamago · 07-28-2009, 03:13 PM

Quote:

Originally Posted by Penguin Garage

hopefully we'll be testing some 15x8 +20mm front and 15x8 +10mm rear wheels soon. :)

225 50 15?

lilredrocket · 07-29-2009, 12:32 AM

Finally a pic with mine installed!!(13mm BTW)

whooppee777 · 07-29-2009, 12:34 AM

Quote:

Originally Posted by Penguin Garage

well, that's a really low offset and a wide tire.

you're going to have to do some work to get that fit as is, going with our hubspacers before you do the install will allow you to do the required mods to make it fit.

a little extra pull and our camber shims will round out the car nicely.

you may want to go with the 10mm spacer although if you're looking for a much more aggressive stance the 13mm would do it.

either way spacer or no spacer you've got a lot of work to do

hopefully we'll be testing some 15x8 +20mm front and 15x8 +10mm rear wheels soon. :)

not worried about the extra work. just want the most aggressive stance the yaris crowd has ever seen. those wheels+your spacers+coilovers=hella f*ckn balls to the wall awesome.

thanks for your input. i'll be placing my order within the next few weeks

evo165 · 08-17-2009, 11:12 AM

Quote:

Originally Posted by Penguin Garage

well, that's a really low offset and a wide tire.

you're going to have to do some work to get that fit as is, going with our hubspacers before you do the install will allow you to do the required mods to make it fit.

a little extra pull and our camber shims will round out the car nicely.

you may want to go with the 10mm spacer although if you're looking for a much more aggressive stance the 13mm would do it.

either way spacer or no spacer you've got a lot of work to do

hopefully we'll be testing some 15x8 +20mm front and 15x8 +10mm rear wheels soon. :)

Hi mate, do you ship internationally to Singapore? I drop u a pm as well as email but yet to hear any news from you. Thanks.

Penguin Garage · 08-18-2009, 01:46 PM

yes we ship internationally.

I'll shoot you an email with the info.

:)

Bob Dog · 08-21-2009, 03:36 PM

The statute quoted is under tires and wheels. These spacers are hub spacers, not wheel spacers. It appears sufficiently ambigous to be argued either way.

Tamago · 08-21-2009, 03:44 PM

Quote:

Originally Posted by Bob Dog

The statute quoted is under tires and wheels. These spacers are hub spacers, not wheel spacers. It appears sufficiently ambigous to be argued either way.

and painted black, they'd NEVER be spotted in an inspection.

TheRealEnth · 08-21-2009, 04:33 PM

yep yep pretty sick

Tamago · 08-21-2009, 04:45 PM

Quote:

Originally Posted by echo_hrs

Sorry Tamago, I just accidentally edited your post instead of mine...

Cheers

ahh, the hazards of quoting! you should have asked for an orange or red penguin

Tamago · 08-21-2009, 04:52 PM

Quote:

Originally Posted by echo_hrs

I didn't even know I was getting a penguin...

Cheers

LOL @ the irony of the name of this thread

Sabretooth · 08-22-2009, 03:28 PM

I believe the 4 are camber shims...for use on the bottom only?

Tamago · 08-22-2009, 05:33 PM

Quote:

Originally Posted by echo_hrs

Hey PG, I was laying out the kit this morning, and I only got 4 washers, Tamago, can you put four of them in with my Cam Timing Valve?...

Cheers

sabretooth is right, those are "optional" camber shims that go on the lower bolts (2 each side) if you choose to add a little rear camber to the mix. we're including them now for free since people seem to be rubbing more on one side of the car more than the other.. (passenger side, right guys?)

06-18-2009, 12:50 PM	#56
lilredrocket Slowy getting there View User's Garage Drives: 08 Liftback Join Date: Nov 2008 Location: DFW, Texas Posts: 1,464	Haha! Talked my boss into letting me do them at work. Working on a car is so much easier when you have a lift! Ill have to take pics when I get home sorry they won't be before and after. __________________

07-27-2009, 11:41 PM	#58
whooppee777 I used to have 1700 posts View User's Garage Drives: 2008 Yaris Hatch Join Date: Apr 2007 Location: Maryland Posts: 808	which spacer with these wheels monarch nilo 16x8 +20 offset 215/45/16 planning ahead of time, dont have tires for them yet. already planning on pulling and rolling fenders. just curious as to whether i could get away with the 13mm spacer __________________ *First Boosted Yaris On The East Coast*

08-21-2009, 04:33 PM	#68
TheRealEnth Beast View User's Garage Drives: 2007 Blz Blu LB Join Date: Oct 2008 Location: Miami, FL Posts: 1,365	yep yep pretty sick __________________ One you've taken a yaris for a spin, there's no turning back. Its a Chao!!!

08-22-2009, 03:28 PM	#71
Sabretooth 37HSSV View User's Garage Drives: '11 Mazdaspeed 3 Join Date: Jan 2007 Location: St Cloud FL Posts: 1,395	I believe the 4 are camber shims...for use on the bottom only? __________________ 07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance.

06-18-2009, 12:35 PM	#55
Penguin Garage Drives: Yaris Join Date: May 2009 Location: FL Posts: 197	Pics!! :D

06-18-2009, 01:15 PM	#57
Penguin Garage Drives: Yaris Join Date: May 2009 Location: FL Posts: 197	it's all good, I just like seeing pics of Yari with proper fitting wheels!

08-18-2009, 01:46 PM	#65
Penguin Garage Drives: Yaris Join Date: May 2009 Location: FL Posts: 197	yes we ship internationally. I'll shoot you an email with the info. :)

08-21-2009, 03:36 PM	#66
Bob Dog DARK PHASE OF THE MOON Drives: 07 liftback Join Date: Apr 2009 Location: the Boondocks, NC Posts: 993	The statute quoted is under tires and wheels. These spacers are hub spacers, not wheel spacers. It appears sufficiently ambigous to be argued either way.