nst incab SSK 09

[NonStopTuning]

Originally Posted by ezhacker1

So i cant seem to the ssk to fit far enough down the shifter shaft, i see theres a lip half way down the ssk that is too narrow for the ball of the shifter to pass, Iv read it should be easy, but i have a 09, and...install the engine bay one was NOT easy, had to shave it down, maybe i am running into same problem again year differences?

UPDATE!!!!

This issue was due to a small machining error on the last batch of the IN-CABIN SSK-2 for the Yaris. We have since resolved this issue and we have asked all of our authorized retailers to return their inventory for immediate replacement.

I believe I chatted with this member earlier today and we got his issue resolved.

So, to conclude...

The NSTSSK09-2 IN-CABIN SSK works for ALL YARIS MODELS!

[AlainMikli]

Originally Posted by NonStopTuning

UPDATE!!!!

This issue was due to a small machining error on the last batch of the IN-CABIN SSK-2 for the Yaris. We have since resolved this issue and we have asked all of our authorized retailers to return their inventory for immediate replacement.

I believe I chatted with this member earlier today and we got his issue resolved.

So, to conclude...

The NSTSSK09-2 IN-CABIN SSK works for ALL YARIS MODELS!

good to hear you finally solve that problem, I shave it myself before to make it fit

http://www.yarisworld.com/forums/showthread.php?t=17419