Polyurethane? Bushing Kits? - Toyota Yaris Forums

bronzebullet232 · 02-02-2010, 11:47 PM

Does anybody know of any poly stuff for out cars? I wanna make my car as solid is possible. Exhaust hangers? Anything?

Subaru's have KARTBOY, so where's the yaris bushings? haha

ozmdd · 02-03-2010, 11:42 AM

Garm found poly exhaust hangers, so you might ask him.

DerFlosser · 02-03-2010, 12:33 PM

Quote:

Originally Posted by ozmdd

Garm found poly exhaust hangers, so you might ask him.

Interested in these...

kngrsll · 02-03-2010, 03:47 PM

no luck here. ive been looking forever. there are only a couple on the car, a few in the front arms, and a couple big fat ones in the rear twist beam. then there are a couple engine and tranny mounts as well.

RHDVIPbB · 02-03-2010, 07:42 PM

I never finished it because I didn't have any spare parts, but a small amount of aftermarket bushings for the tC were very close to the Yaris. Most were the same measurements, but I never got a chance to see if they would fit.

kngrsll · 02-03-2010, 09:17 PM

Quote:

Originally Posted by RHDVIPbB

I never finished it because I didn't have any spare parts, but a small amount of aftermarket bushings for the tC were very close to the Yaris. Most were the same measurements, but I never got a chance to see if they would fit.

interesting, will look into it.

also, i think the MR-S and the Yaris share the same part # for front lower control arms. so, the bushings should match as well. i found that out when i was looking at mooncraft roll center ball joints.

cali yaris · 02-03-2010, 09:59 PM

I have all the TRD bushings from Japan, they actually make quite a few.

I'll take some pics and post up all the parts you can get for your Yaris.

RHDVIPbB · 02-03-2010, 10:22 PM

really for the MRS? The local shop has a guy with a really well built MRS for auto-x and road course racing. Might have to stop by and see what he has.

bronzebullet232 · 02-03-2010, 10:55 PM

Quote:

Originally Posted by cali yaris

I have all the TRD bushings from Japan, they actually make quite a few.

I'll take some pics and post up all the parts you can get for your Yaris.

OMG. Please do. I Pm'd you too. If you got them, I wanna buy em. As usual stop buy on my lunch... lol

kngrsll · 02-03-2010, 10:56 PM

the mooncraft A arms were the same part number, so that what im basing that on! illl look some more and make sure...

kngrsll · 02-03-2010, 11:07 PM

here is the site im talking about: http://www.rhdjapan.com/catalog/prod...s-zzw30-60204/

the MR-s and yaris are listed under the same part #

RHDVIPbB · 02-03-2010, 11:58 PM

ooh, those are nice. But what year vitz? I might have overlooked if the site listed it.

kngrsll · 02-04-2010, 12:07 AM

It lists the NCP91, which is our chassis and the ZZW30, the MR-S

DerFlosser · 02-04-2010, 10:31 AM

I am just interested in some poly exhaust hangers. Garm....are those available through TRD?

cali yaris · 02-04-2010, 12:27 PM

I have some in my shop that look just like these:

http://www.cobbtuning.com/products/?id=2255

http://www.good-win-racing.com/Mazda...t/60-1095.html

DerFlosser · 02-04-2010, 01:29 PM

Those COBB ones look nice. Are they the same dimensions as the Stock ones? Are they what you use?

bronzebullet232 · 06-11-2010, 02:37 PM

Quote:

Originally Posted by DerFlosser

Those COBB ones look nice. Are they the same dimensions as the Stock ones? Are they what you use?

Well I ordered the cobb ones. Hopefully they will work. I'll let you guys know.

bronzebullet232 · 06-18-2010, 04:45 PM

Quote:

Originally Posted by bronzebullet232

Well I ordered the cobb ones. Hopefully they will work. I'll let you guys know.

So I ordered the 15mm cobb exhaust hanger for the 2004 - 07 WRX. Its too long and the holes are too big... It was worth a try.

02-02-2010, 11:47 PM	#1
bronzebullet232 View User's Garage Drives: 2010 Black 3dr Lift Back Join Date: Nov 2008 Location: California Posts: 62	Polyurethane? Bushing Kits? Does anybody know of any poly stuff for out cars? I wanna make my car as solid is possible. Exhaust hangers? Anything? Subaru's have KARTBOY, so where's the yaris bushings? haha

02-03-2010, 03:47 PM	#4
kngrsll Apexing Egg!! Drives: 07 Toyota Yaris white hatch Join Date: Oct 2006 Location: Spartanburg, SC Posts: 872	no luck here. ive been looking forever. there are only a couple on the car, a few in the front arms, and a couple big fat ones in the rear twist beam. then there are a couple engine and tranny mounts as well. __________________ HighTach Motorsports 2007 Toyota Yaris-ARGH!! Mods: Tokico HTS, 6.6 kg F, 6.1 kg R custom springs, 23 mm RSB, 2-way TRD LSD, 15x7 +25 Team Dynamic wheels, 195/55/15 Dunlop Star Specs, Cobra Suzuka S

02-03-2010, 07:42 PM	#5
RHDVIPbB Right beside you, wave Drives: 08 PBM Yaris Sedan Join Date: Oct 2008 Location: Louisville, KY Posts: 742	I never finished it because I didn't have any spare parts, but a small amount of aftermarket bushings for the tC were very close to the Yaris. Most were the same measurements, but I never got a chance to see if they would fit. __________________ 2008 Toyota Yaris Sedan. Pacific Blue Mica. Custom vinyl eyebrows, color matched interior trim pieces, Vios lip spoiler, 17" Maas rims 2010 Scion xB 7.0 Release Series. 1535 of 2000. Murasaki. Stock with TRD springs.

02-03-2010, 09:59 PM	#7
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	I have all the TRD bushings from Japan, they actually make quite a few. I'll take some pics and post up all the parts you can get for your Yaris. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

02-03-2010, 10:22 PM	#8
RHDVIPbB Right beside you, wave Drives: 08 PBM Yaris Sedan Join Date: Oct 2008 Location: Louisville, KY Posts: 742	really for the MRS? The local shop has a guy with a really well built MRS for auto-x and road course racing. Might have to stop by and see what he has. __________________ 2008 Toyota Yaris Sedan. Pacific Blue Mica. Custom vinyl eyebrows, color matched interior trim pieces, Vios lip spoiler, 17" Maas rims 2010 Scion xB 7.0 Release Series. 1535 of 2000. Murasaki. Stock with TRD springs.

02-03-2010, 11:42 AM	#2
ozmdd Reluctantly Crouched... Drives: 2008 Yaris HB M/T Join Date: Oct 2008 Location: DFW, TX Posts: 867	Garm found poly exhaust hangers, so you might ask him.

02-03-2010, 10:56 PM	#10
kngrsll Apexing Egg!! Drives: 07 Toyota Yaris white hatch Join Date: Oct 2006 Location: Spartanburg, SC Posts: 872	the mooncraft A arms were the same part number, so that what im basing that on! illl look some more and make sure... __________________ HighTach Motorsports 2007 Toyota Yaris-ARGH!! Mods: Tokico HTS, 6.6 kg F, 6.1 kg R custom springs, 23 mm RSB, 2-way TRD LSD, 15x7 +25 Team Dynamic wheels, 195/55/15 Dunlop Star Specs, Cobra Suzuka S

02-03-2010, 11:07 PM	#11
kngrsll Apexing Egg!! Drives: 07 Toyota Yaris white hatch Join Date: Oct 2006 Location: Spartanburg, SC Posts: 872	here is the site im talking about: http://www.rhdjapan.com/catalog/prod...s-zzw30-60204/ the MR-s and yaris are listed under the same part # __________________ HighTach Motorsports 2007 Toyota Yaris-ARGH!! Mods: Tokico HTS, 6.6 kg F, 6.1 kg R custom springs, 23 mm RSB, 2-way TRD LSD, 15x7 +25 Team Dynamic wheels, 195/55/15 Dunlop Star Specs, Cobra Suzuka S

02-03-2010, 11:58 PM	#12
RHDVIPbB Right beside you, wave Drives: 08 PBM Yaris Sedan Join Date: Oct 2008 Location: Louisville, KY Posts: 742	ooh, those are nice. But what year vitz? I might have overlooked if the site listed it. __________________ 2008 Toyota Yaris Sedan. Pacific Blue Mica. Custom vinyl eyebrows, color matched interior trim pieces, Vios lip spoiler, 17" Maas rims 2010 Scion xB 7.0 Release Series. 1535 of 2000. Murasaki. Stock with TRD springs.

02-04-2010, 12:07 AM	#13
kngrsll Apexing Egg!! Drives: 07 Toyota Yaris white hatch Join Date: Oct 2006 Location: Spartanburg, SC Posts: 872	It lists the NCP91, which is our chassis and the ZZW30, the MR-S __________________ HighTach Motorsports 2007 Toyota Yaris-ARGH!! Mods: Tokico HTS, 6.6 kg F, 6.1 kg R custom springs, 23 mm RSB, 2-way TRD LSD, 15x7 +25 Team Dynamic wheels, 195/55/15 Dunlop Star Specs, Cobra Suzuka S

02-04-2010, 10:31 AM	#14
DerFlosser Drives: Yaris Join Date: Apr 2009 Location: USA Posts: 355	I am just interested in some poly exhaust hangers. Garm....are those available through TRD?

02-04-2010, 12:27 PM	#15
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	I have some in my shop that look just like these: http://www.cobbtuning.com/products/?id=2255 http://www.good-win-racing.com/Mazda...t/60-1095.html __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

02-04-2010, 01:29 PM	#16
DerFlosser Drives: Yaris Join Date: Apr 2009 Location: USA Posts: 355	Those COBB ones look nice. Are they the same dimensions as the Stock ones? Are they what you use?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo kits!!	djgab101	Forced Induction Forum	26	03-09-2015 04:24 PM
JDM Plastic model kits and other assorted hobby products	Thirty-Nine	Items for Sale by private party	7	06-24-2009 03:28 PM
Toyota Yaris 5 Doors Body Kits	k3nn4	Australia	23	05-08-2009 11:28 PM
NST NonStopTuning Short Shift Kits	NonStopTuning	NonStopTuning	2	11-11-2008 08:39 PM
NEW NST SS Shifter Bushing (AE86)	NonStopTuning	NonStopTuning	3	10-01-2007 04:12 PM