FS: Push to Start Trim Piece

[CTScott]

Originally Posted by schleppy

How hard is it to wire up the actual button?

I created a module that works with the OEM Engine Start/Stop Switch, and lets the switch start and stop the engine (and it drives the LEDs on the OEM switch).

There are 5 wires that connect between the switch and the module, 3 wires that connect to the ignition switch and one wire that gets tied to chassis ground.

PTS - Prewired.jpg

Here's a video of the switch in action, which also explains the installation:

http://www.youtube.com/watch?v=v6zinlD58Eg

[kazama82]

Originally Posted by CTScott

I created a module that works with the OEM Engine Start/Stop Switch, and lets the switch start and stop the engine (and it drives the LEDs on the OEM switch).

There are 5 wires that connect between the switch and the module, 3 wires that connect to the ignition switch and one wire that gets tied to chassis ground.

Attachment 33598

Here's a video of the switch in action, which also explains the installation:

http://www.youtube.com/watch?v=v6zinlD58Eg

hi scott, will this module work with yaris sedan?..how much to shipped to Malaysia?

[kazama82]

Originally Posted by kazama82

hi scott, will this module work with yaris sedan?..how much to shipped to Malaysia?

[CTScott]

Originally Posted by kazama82

It definitely would work with a Malaysian Yaris. Shipping would be $10 to Malaysia.