I like symmetry... - Toyota Yaris Forums

33OH · 01-20-2012, 12:37 PM

Stance will rub.

TSW or Borbet will bolt right on, no rubbing, no other items required besides "tuner lugs" to fit in the smaller lug holes on the wheel. 12x1.5mm is what thread pitch you need of these. Can pick them up at your local auto parts store or eBay, or some wheel and tire sites will have them packaged as an "installation kit."

They may try to sell you hubcentric rings, may as well just get them. If they do not try to give you these, then there is no need for them as long as you tighten your lugs diagonally when installing.

For example...

1____4

3____2

01-20-2012, 12:37 PM	#1
33OH Drives: '08 Yaris Join Date: Oct 2008 Location: Dover, Ohio Posts: 7,606	Stance will rub. TSW or Borbet will bolt right on, no rubbing, no other items required besides "tuner lugs" to fit in the smaller lug holes on the wheel. 12x1.5mm is what thread pitch you need of these. Can pick them up at your local auto parts store or eBay, or some wheel and tire sites will have them packaged as an "installation kit." They may try to sell you hubcentric rings, may as well just get them. If they do not try to give you these, then there is no need for them as long as you tighten your lugs diagonally when installing. For example... 1____4 3____2