Blitz/Uras gauges. How do you even? - Toyota Yaris Forums

47_MasoN_47 · 10-15-2012, 05:31 PM

So I need to install this thing on the manifold

http://www.amazon.com/Parker-2-4-B2H...d_sbs_indust_3

and move that oil pressure thing I have on there now to another thing?

yarisugi · 10-15-2012, 05:40 PM

EDIT: DISREGARD THIS POST.

No, I don't think CTScott is telling you to switch those two.
I think your oil pressure thing that you have in there is fine where it is.
As for the skinny hose that's coming out of your live unit, that has to tap into your intake manifold. This way your live unit will detect how much boost you're getting and inform you when you look at your boost gauge.

CTScott · 10-15-2012, 09:37 PM

Quote:

Originally Posted by yarisugi

No, I don't think CTScott is telling you to switch those two.
I think your oil pressure thing that you have in there is fine where it is.
As for the skinny hose that's coming out of your live unit, that has to tap into your intake manifold. This way your live unit will detect how much boost you're getting and inform you when you look at your boost gauge.

With the Blitz that hole in the manifold is specifically intended for connection of a boost gauge. I initially missed the fact that the boost gauge for the kit has a hose, rather than electronic sender. If you used the pressure gauge sensor there, you would not see the negative pressure of the vacuum and would barely move the gauge for the six pounds of boost generated by the S/C.

yarisugi · 10-15-2012, 11:33 PM

OK my bad! Sorry Mason.
So you're saying to remove the pressure sensor and replace it with the 1/4-1/8" fitting for the vacuum line from the live unit.
Where does the sensor go to? Are there other orifices?

CTScott · 10-15-2012, 11:36 PM

Quote:

Originally Posted by yarisugi

OK my bad! Sorry Mason.
So you're saying to remove the pressure sensor and replace it with the 1/4-1/8" fitting for the vacuum line from the live unit.
Where does the sensor go to? Are there other orifices?

The pressure sensor is for oil pressure. You would mount that somewhere where you can see the oil pressure, like at the filter sandwich adapter that they mention in the instructions.

CTScott · 10-15-2012, 09:34 PM

Quote:

Originally Posted by 47_MasoN_47

So I need to install this thing on the manifold

http://www.amazon.com/Parker-2-4-B2H...d_sbs_indust_3

and move that oil pressure thing I have on there now to another thing?

Correct.

10-15-2012, 05:31 PM	#1
47_MasoN_47 What I thought I'd do was View User's Garage Drives: 09 Yaris Sedan Join Date: Aug 2009 Location: Northwest Alabama Posts: 1,140	So I need to install this thing on the manifold http://www.amazon.com/Parker-2-4-B2H...d_sbs_indust_3 and move that oil pressure thing I have on there now to another thing? __________________ My Nissan Hardbody (D21) 4x4 build log Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47

10-15-2012, 05:40 PM	#2
yarisugi やりすぎだ～ View User's Garage Drives: Me: Nuts: Join Date: Nov 2008 Location: ハワイ Posts: 2,041	EDIT: DISREGARD THIS POST. No, I don't think CTScott is telling you to switch those two. I think your oil pressure thing that you have in there is fine where it is. As for the skinny hose that's coming out of your live unit, that has to tap into your intake manifold. This way your live unit will detect how much boost you're getting and inform you when you look at your boost gauge. Last edited by yarisugi; 10-16-2012 at 12:05 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Upper driver's side glove box w/ holes cut for gauges	PETERPOOP	Items for Sale by private party	9	07-31-2011 08:21 PM
Install Oil Pressure, Voltage and Temperature Gauges with DIY Holder	bieniman	DIY / Maintenance / Service	4	05-20-2009 12:40 AM
My new gauges set up	PETERPOOP	Cosmetic Modifications (Exterior/Interior)	30	04-19-2009 09:50 PM
Mechanical vs Electric Gauges?	PETERPOOP	Forced Induction Forum	13	04-06-2009 02:25 AM
WTB: Boost Gauges	Teruyume	Items for Sale by private party	4	11-12-2006 03:42 PM

10-15-2012, 11:33 PM	#4
yarisugi やりすぎだ～ View User's Garage Drives: Me: Nuts: Join Date: Nov 2008 Location: ハワイ Posts: 2,041	OK my bad! Sorry Mason. So you're saying to remove the pressure sensor and replace it with the 1/4-1/8" fitting for the vacuum line from the live unit. Where does the sensor go to? Are there other orifices?