Scion XB / Yaris Blitz SC compatible? - Toyota Yaris Forums

TOLMACH · 03-19-2013, 04:07 PM

Just got p0441 CEl

Kinda suspect it deals with the black box with two rubber hoses mounted on top of the air filter tube (tube between the filter and intake manifold).. I forgot to install one of the tubes (I do not have enogh nipples on my intake manifold) - will probably have to splice into one of the vacuum tubes between around the intake manifold.

CTScott · 03-19-2013, 05:05 PM

Quote:

Originally Posted by TOLMACH

Just got p0441 CEl

Kinda suspect it deals with the black box with two rubber hoses mounted on top of the air filter tube (tube between the filter and intake manifold).. I forgot to install one of the tubes (I do not have enogh nipples on my intake manifold) - will probably have to splice into one of the vacuum tubes between around the intake manifold.

Yes. 0441 is an issue with the purge VSV, which is that little square box.

TOLMACH · 03-20-2013, 12:49 AM

Quote:

Originally Posted by CTScott

Yes. 0441 is an issue with the purge VSV, which is that little square box.

Thank you!

Special thanks for adding "which is that little square box" - this is exactly my technical level ))))))

TOLMACH · 03-23-2013, 01:20 PM

Quote:

Originally Posted by CTScott

Yes. 0441 is an issue with the purge VSV, which is that little square box.

Thanks, attached a proper pipe and cleared the CEL - looking good now.

tooter · 03-19-2013, 05:37 PM

Quote:

Originally Posted by TOLMACH

Just got p0441 CEl

Kinda suspect it deals with the black box with two rubber hoses mounted on top of the air filter tube (tube between the filter and intake manifold).. I forgot to install one of the tubes (I do not have enogh nipples on my intake manifold) - will probably have to splice into one of the vacuum tubes between around the intake manifold.

Since the throttle body adaptor is an inch thick, you could easily drill a hole into the soft aluminium from the side and tap in a short length of copper tubing to make a third nipple.

TOLMACH · 03-23-2013, 01:21 PM

Quote:

Originally Posted by tooter

Since the throttle body adaptor is an inch thick, you could easily drill a hole into the soft aluminium from the side and tap in a short length of copper tubing to make a third nipple.

Would not dare drilling it - looking too good )) Just used the Y-splitter for one of the existing vacuum tubes.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
Factory OEM Scion T1814 Pioneer Deck in the Yaris PICS	auxmike	In Car Entertainment + Electronics (audio / video / alarm)	20	08-03-2012 12:30 AM
Putting scion seats in a yaris	xnamerxx	Cosmetic Modifications (Exterior/Interior)	3	03-09-2010 01:17 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 05:54 PM

03-19-2013, 04:07 PM	#1
TOLMACH Drives: soarer Join Date: Feb 2011 Location: Beautiful British Columbia Posts: 954	Just got p0441 CEl Kinda suspect it deals with the black box with two rubber hoses mounted on top of the air filter tube (tube between the filter and intake manifold).. I forgot to install one of the tubes (I do not have enogh nipples on my intake manifold) - will probably have to splice into one of the vacuum tubes between around the intake manifold.