Scion XB / Yaris Blitz SC compatible?

[tooter]

Originally Posted by TOLMACH

Just got p0441 CEl

Kinda suspect it deals with the black box with two rubber hoses mounted on top of the air filter tube (tube between the filter and intake manifold).. I forgot to install one of the tubes (I do not have enogh nipples on my intake manifold) - will probably have to splice into one of the vacuum tubes between around the intake manifold.

Since the throttle body adaptor is an inch thick, you could easily drill a hole into the soft aluminium from the side and tap in a short length of copper tubing to make a third nipple.

[TOLMACH]

Originally Posted by tooter

Since the throttle body adaptor is an inch thick, you could easily drill a hole into the soft aluminium from the side and tap in a short length of copper tubing to make a third nipple.

Would not dare drilling it - looking too good )) Just used the Y-splitter for one of the existing vacuum tubes.