Throttle Body Swap

[Bluevitz-rs]

But that's also V6 Cranky

[CrankyOldMan]

Originally Posted by Bluevitz-rs

But that's also V6 Cranky

Yes, but I'm not sure that's important here, unless it's too big. =)

[Ryze268]

Originally Posted by tooter

Hi Justin,

I offer a throttle body adaptor. It allows a 4 bolt 55mm 1ZZ throttle body to be installed onto a 3 bolt manifold. The only obstacle I can see is that the 4 bolt throttlebodies are electronically operated as opposed to the cable operated 3 bolt throttle bodies.



It will be 2 months before I'll have any in stock, as the CNC engineer is working on a big project, so my small orders need to wait.

Greg

Tooter that would be so great to have but two months is a really long time :(

Originally Posted by Bluevitz-rs

any 1ZZ before '04 I think are cable operated. There's a '03 corolla in the family and it's cable operated.

Yes I know there are cable operated throttle bodies but most are 4 bolt. My question is if that 3 bolt 7A throttle body would fit on my engine.

[tooter]

Originally Posted by Ryze268

Tooter that would be so great to have but two months is a really long time :(

I know. Sorry... there are also others who are waiting for parts. I'm stuck because a really big project has come along and sidetracked my little stuff.

Yes I know there are cable operated throttle bodies but most are 4 bolt. My question is if that 3 bolt 7A throttle body would fit on my engine.

See if you can find the specs for it. I'll look too.


Greg

edit: Did a picture search and found this one also on ebay. Toyota is notorious for using the same parts in different applications. This one is for 99-02 1.8 Corollas and also for Geo Prizms.



And this one is also for a 1998 Corolla that I had in stock. It's a 51mm bore.






A guy in Australia runs it on my tooter aluminum intake manifold without the 4 bolt throttle body adaptor on his Echo...



...because he was cable operated and didn't want to go through the hassle of trying to install electronic controls.

That's a big issue, if you're cable... stay cable.

Greg

[Ryze268]

Originally Posted by tooter

I know. Sorry... there are also others who are waiting for parts. I'm stuck because a really big project has come along and sidetracked my little stuff.

See if you can find the specs for it. I'll look too.


Greg

edit: Did a picture search and found this one also on ebay. Toyota is notorious for using the same parts in different applications. This one is for 99-02 1.8 Corollas and also for Geo Prizms.



And this one is also for a 1998 Corolla that I had in stock. It's a 51mm bore.






A guy in Australia runs it on my tooter aluminum intake manifold without the 4 bolt throttle body adaptor on his Echo...



...because he was cable operated and didn't want to go through the hassle of trying to install electronic controls.

That's a big issue, if you're cable... stay cable.

Greg

Thanks a lot tooter

The prices on ebay don't seem to bad so I'll give one a try and if it doesn't fit, I'll just wait for your adapter