Fog lights as DRL ?

[CTScott]

The DRL is the headlight bulb itself, so to feed the fog lights instead you would have to cut the feed wire from the DRL relay (under the dash) and run it to the fogs instead.

[IllusionX]

Originally Posted by CTScott

The DRL is the headlight bulb itself, so to feed the fog lights instead you would have to cut the feed wire from the DRL relay (under the dash) and run it to the fogs instead.

Don't forget the DRL feed is pulsed at 12v. When I fed it directly to the fog light switch, if flickered the fog relay. A small capacitor fixed the issue.

[CTScott]

Originally Posted by IllusionX

Don't forget the DRL feed is pulsed at 12v. When I fed it directly to the fog light switch, if flickered the fog relay. A small capacitor fixed the issue.

That output shouldn't go to the relay - It should go directly to the bulb.

[IllusionX]

Originally Posted by CTScott

That output shouldn't go to the relay - It should go directly to the bulb.

I wanted it to be switched. So I connected the feed to the Orange wire of the DRL module.

[HartmannX]

Originally Posted by IllusionX

I wanted it to be switched. So I connected the feed to the Orange wire of the DRL module.

It is also a solution.
Have big was the capacitor you used?