In line rear speakers wiring? Possible?

[IllusionX]

Originally Posted by kevinj93

I would avoid putting the rear speakers in parallel with the front speakers. The head unit is designed to drive a 4 ohm load. If you put the 2 sets of speakers in parallel, you will be asking it to drive a 2 ohm load. There is a real possibility you will overload the output stage and burn it out.

If your head unit does not have separate outputs for the rear speakers, you would need to replace it or add an amplifier to drive the rear speakers.

The power rating on the speakers is not what they require, but the maximum they are rated to handle. you don't 'need' that much power. try them "as is", and you can add an amplifier or change head units if you feel they aren't loud enough.

Actually, the fujitsuten head unit is 2ohm stable. It was designed to drive tweeters in parallel with the full range door speakers. Not necessarily on the yaris, but also on other models. The Pioneer is probably 2ohm capable too, but I'm not sure about this.

Either way, the rear speakers should split from either side of the front kick panel. I forgot which side, so all you have to do is tap there and run the wires to the back and you get rear speakers working.

Sent from my SM-G930W8 using Tapatalk

[miiser]

Originally Posted by IllusionX

Actually, the fujitsuten head unit is 2ohm stable. It was designed to drive tweeters in parallel with the full range door speakers. Not necessarily on the yaris, but also on other models. The Pioneer is probably 2ohm capable too, but I'm not sure about this.

Either way, the rear speakers should split from either side of the front kick panel. I forgot which side, so all you have to do is tap there and run the wires to the back and you get rear speakers working.

Sent from my SM-G930W8 using Tapatalk

I didn't quite catch up what you said exactly. You mean there are ready wirings inputs??


Sent from my iPhone using Tapatalk

[IllusionX]

Originally Posted by miiser

I didn't quite catch up what you said exactly. You mean there are ready wirings inputs??


Sent from my iPhone using Tapatalk

Yes. I dont see why wires would be removed at the HU harness. I am pretty sure the audio wires come out of either side of the kick panel. Look up the kick panel connector wiring manual..

Sent from my SM-G930W8 using Tapatalk

[miiser]

Originally Posted by IllusionX

Yes. I dont see why wires would be removed at the HU harness. I am pretty sure the audio wires come out of either side of the kick panel. Look up the kick panel connector wiring manual..

Sent from my SM-G930W8 using Tapatalk

Do you know where to search for them?
I am not really into these things so if you could navigate me on the area I need to look for it would be really helpful


Sent from my iPhone using Tapatalk