In line rear speakers wiring? Possible?

[miiser]

Originally Posted by IllusionX

Actually, the fujitsuten head unit is 2ohm stable. It was designed to drive tweeters in parallel with the full range door speakers. Not necessarily on the yaris, but also on other models. The Pioneer is probably 2ohm capable too, but I'm not sure about this.

Either way, the rear speakers should split from either side of the front kick panel. I forgot which side, so all you have to do is tap there and run the wires to the back and you get rear speakers working.

Sent from my SM-G930W8 using Tapatalk

I didn't quite catch up what you said exactly. You mean there are ready wirings inputs??


Sent from my iPhone using Tapatalk

[IllusionX]

Originally Posted by miiser

I didn't quite catch up what you said exactly. You mean there are ready wirings inputs??


Sent from my iPhone using Tapatalk

Yes. I dont see why wires would be removed at the HU harness. I am pretty sure the audio wires come out of either side of the kick panel. Look up the kick panel connector wiring manual..

Sent from my SM-G930W8 using Tapatalk

[miiser]

Originally Posted by IllusionX

Yes. I dont see why wires would be removed at the HU harness. I am pretty sure the audio wires come out of either side of the kick panel. Look up the kick panel connector wiring manual..

Sent from my SM-G930W8 using Tapatalk

Do you know where to search for them?
I am not really into these things so if you could navigate me on the area I need to look for it would be really helpful


Sent from my iPhone using Tapatalk