Finding Dory

[miiser]

Originally Posted by Kaotic Lazagna

Those T4 LEDs should be fine. I did have to scrape off some of the plastic in the hole of the HVAC unit to make the hole bigger. If you have trouble fitting those in, you might have to do the same. Although I don't suspect that since the LED boards don't look like it's bigger than the top of the base.

That sucks about shipping costing more than the LEDs from VLEDs. You'll have to find a reputable LED manufacturer/brand in your country if there is one.

The footwell LEDs will fade on and off as well.

Yes I guess if I want some led bulbs for important lights such as brakes I will buy either Phillips or osram.
Thanks for your help buddy I already ordered these leds you mention that you use.
I will try to do the same with the footwells as you.
Also I purchased some cheap 194 led bulbs too that they claim they are Samsung leds. I will use them on the license plate. And if they are good enough I might use them for the back lights too

Hope it works out


Sent from my iPhone using Tapatalk