Spoon Rigid Collars NCP91 - Toyota Yaris Forums

saikouguy · 09-04-2019, 12:49 AM

Take a look at this. https://www.rigidcollar.jp/blog/2014...4%9C%E8%A8%BC/

You shouldn't really have to unbolt anything unless it you have a brace.

Best way to install it is to jack the car up on some stands and then use the jack to brace & lower the subframe abit as you back out the 4 subframe bolts far enough to slip in the collars when you remove 1 of the 4 bolts then put the bolt back in after you've installed it.

You may need a pry bar to pry the subframe for that extra clearance as it still has the rear engine mount which could cause the subframe not to lower far enough for you to slip the collar in.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Full NCP91 KavinT Manseth Kit (Front Bumper has Damage)	Treyz	Items for Sale by private party	22	04-08-2014 07:17 PM
RZCrew Garage Rigid Collars	Chuckie	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	35	02-13-2014 01:34 AM
SilkRoad NCP91 Coilovers In-Stock!	Penguin Garage	Penguin Garage	28	07-12-2009 06:48 PM

09-04-2019, 12:49 AM	#1
saikouguy Drives: Toyota Echo Join Date: Oct 2016 Location: Sydney, Australia Posts: 13	Take a look at this. https://www.rigidcollar.jp/blog/2014...4%9C%E8%A8%BC/ You shouldn't really have to unbolt anything unless it you have a brace. Best way to install it is to jack the car up on some stands and then use the jack to brace & lower the subframe abit as you back out the 4 subframe bolts far enough to slip in the collars when you remove 1 of the 4 bolts then put the bolt back in after you've installed it. You may need a pry bar to pry the subframe for that extra clearance as it still has the rear engine mount which could cause the subframe not to lower far enough for you to slip the collar in.