Driver side power window not working

[bronsin]

Do you have a volt ohm meter? See if you have 12 V at the switch if not that’s the problem. If you have 12 to switch it’s the switch

[tobsie]

Originally Posted by bronsin

Do you have a volt ohm meter? See if you have 12 V at the switch if not that’s the problem. If you have 12 to switch it’s the switch

Oops, forgot to mention. I measured it at the power window connector in de door (to the motor). I meassured 0 volt when pushing or pulling the switch.
To be sure I also measured the passenger power window connector. This gave 12 volt.
But, the passenger only had a 2 wire plug. The driver side window had more wires. There were 2 wires which were thicker and looked the same as the passenger side wire plug. So I meassured those. The other were all thin wires.
Is this correct or am I meassuring wrong?

All the other function on the panel work, so the panel has 12 volt.