RS Intake Manifold,airbox mod and 1zzfe throttle body/injectors

[Compeer]

Originally Posted by mitch9521

Excuse me? I wanna see this, that sounds awesome. The 1NZ-FE doesn't get the love it deserves in North America.

Theres a company here that specilizes turning them into jet boat engines, they are light wight, reliable and have plenty of torue for the job being designed for a cvt transmission they are perfect for jet boating. https://www.youtube.com/watch?v=mkyk9MPCe-M

Originally Posted by ardianpradana

I have use the RS intake manifold and not using any spacers

have to cut 1 bolt (knock sensor bolt I believe), and cut some coolant line and reroute the line

Nice so the bolt i didnt know I had to move and the hose I had realized was going to need modified, Right now im pretty happy with how the long set up is performing but will in the future try that, did you notice any difference?

[ardianpradana]

Originally Posted by Compeer

Theres a company here that specilizes turning them into jet boat engines, they are light wight, reliable and have plenty of torue for the job being designed for a cvt transmission they are perfect for jet boating. https://www.youtube.com/watch?v=mkyk9MPCe-M



Nice so the bolt i didnt know I had to move and the hose I had realized was going to need modified, Right now im pretty happy with how the long set up is performing but will in the future try that, did you notice any difference?

in real world driving, I'm not noticing any differences

but on dyno, my peak torque shifts 300rpm higher

with stock manifold, the torque drop 25% between peak torque and torque at rev limiter

with RS manifold, the torque drop 19% between peak torque and torque and limiter

[Compeer]

Originally Posted by ardianpradana

in real world driving, I'm not noticing any differences

but on dyno, my peak torque shifts 300rpm higher

with stock manifold, the torque drop 25% between peak torque and torque at rev limiter

with RS manifold, the torque drop 19% between peak torque and torque and limiter

Fair enough Im liking how mine runs now with the longer manifold, but may still change it up at some point.

Need to dyno my car to find out and won't do that till i have a tune for it.

Going to get a trd cap and leave it upside down just for remcafe! lmfao

[Neinris]

Originally Posted by Compeer

...Going to get a trd cap and leave it upside down just for remcafe! lmfao

put the extenders on the stock intake...

[Compeer]

Originally Posted by Neinris

put the extenders on the stock intake...

It is! Its crazy torque down low now with the other mods Ive done, very very easy to loose traction now in 2nd and in the wet in most gears lol.

I haven't been active for a while because the car currently is just damn fun to drive, the Throttle body change, intake runner spacer, intake tube and airbox mod are just working so damn well. The car has no dead spot any more and will DURTTTTT all the way from 1.8krpm..give her the beans and it lights up till red line. With only 6400rpm max it feels like I never get off the torque curve. I dont think I will change the manifold to the shorter one as currently she destroys the tires in 1st and 2nd gear and feels like you are actually driving a hot hatch.

[sh0rtlife]

Originally Posted by Compeer

It is! Its crazy torque down low now with the other mods Ive done, very very easy to loose traction now in 2nd and in the wet in most gears lol.

I haven't been active for a while because the car currently is just damn fun to drive, the Throttle body change, intake runner spacer, intake tube and airbox mod are just working so damn well. The car has no dead spot any more and will DURTTTTT all the way from 1.8krpm..give her the beans and it lights up till red line. With only 6400rpm max it feels like I never get off the torque curve. I dont think I will change the manifold to the shorter one as currently she destroys the tires in 1st and 2nd gear and feels like you are actually driving a hot hatch.

id kill for the spacer..they dont seem to exist here.....all said mine pulls real good for everything else ive done

[Compeer]

Originally Posted by sh0rtlife

id kill for the spacer..they dont seem to exist here.....all said mine pulls real good for everything else ive done

Its the EGR plate that I used JB weld on to seal the holes on. where ever you find the shorter manifold you find the egr plate, it bolts on to our block normally, just means you have to loose the top engine cover.