Help with Fog Lights!! (I HATE WIRES!) - Toyota Yaris Forums

Lafiro · 09-19-2009, 02:40 PM

I have the same problem. Remove the yellow wire and let it hang not touching anything.

Now turn on your fog lights, and they should work! Also make sure the ground is connected in the engine bay for the fog lights as well, don't forget that.

I also have Garms kit, it also came completely different then what the diagram asked for, with extra parts and cables. But at the end I got it working.

I am only stuck now wondering why it is that if I connect the yellow wire to the harness behind the light dimmer, that is doesnt allow anything to work.

Let me know what happens when you un-splice that wire to test what I said.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY (08' USDM Liftback): ESUSE Fog Light Install v2.0	goku87	DIY / Maintenance / Service	127	02-19-2023 07:01 PM
Sedan Fog Lights, few questions!(where to get) ( make into HID Fog Lights!!!)	Lafiro	Cosmetic Modifications (Exterior/Interior)	2	06-12-2009 03:56 PM
Disabled DRLs and Factory fog lights	DARKYARIS	DIY / Maintenance / Service	21	05-01-2007 05:32 PM
can i / where to get factory switch for aftermarket fog lights? and exhaust tip q.	fantabulousbaby	Cosmetic Modifications (Exterior/Interior)	22	08-29-2006 01:13 PM
Fog lights for S sedans (US version)	paeko73	General Yaris / Vitz Discussion	11	07-02-2006 11:38 PM

09-19-2009, 02:40 PM	#11
Lafiro Drives: 06 Yaris Sedan Join Date: Jun 2006 Location: NYC Posts: 694	I have the same problem. Remove the yellow wire and let it hang not touching anything. Now turn on your fog lights, and they should work! Also make sure the ground is connected in the engine bay for the fog lights as well, don't forget that. I also have Garms kit, it also came completely different then what the diagram asked for, with extra parts and cables. But at the end I got it working. I am only stuck now wondering why it is that if I connect the yellow wire to the harness behind the light dimmer, that is doesnt allow anything to work. Let me know what happens when you un-splice that wire to test what I said.