tooter's manifold adventure... - Toyota Yaris Forums

tooter · 07-21-2013, 01:25 AM

Picked up the tooter et plenum to runner connecting plate today. It's far beyond what I had expected!

The plate fits so precisely to the runner base, I couldn't pry it off so I'll just leave there to be welded on. the hemisphere sets on a ledge and centers itself.

Now I'll do one last on the car fitting to rotate the hemisphere and mark the best attitude of the throttle body to line up with the intake.

Next, the hemisphere will be drilled to accept some aluminum tubes for the three hose fittings. Then the whole assembly goes off to the welder!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
homemade intake manifold	ttr125fan09	Performance Modifications	1	02-17-2012 01:09 AM
Custom Intake Manifold + Direct Port Nitrous	blacksandiegovitz	Performance Modifications	9	04-21-2010 07:05 PM
Turbo Manifold thread	Sabretooth	Forced Induction Forum	78	05-22-2009 06:52 AM
turbo manifold build...	joey1320	Forced Induction Forum	4	06-30-2007 02:26 PM

07-21-2013, 01:25 AM	#11
tooter play every day Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012 Location: Los Angeles Posts: 1,962	Picked up the tooter et plenum to runner connecting plate today. It's far beyond what I had expected! The plate fits so precisely to the runner base, I couldn't pry it off so I'll just leave there to be welded on. the hemisphere sets on a ledge and centers itself. Now I'll do one last on the car fitting to rotate the hemisphere and mark the best attitude of the throttle body to line up with the intake. Next, the hemisphere will be drilled to accept some aluminum tubes for the three hose fittings. Then the whole assembly goes off to the welder!