just put in cold air. Need help - Page 2 - Toyota Yaris Forums

mikenacarato · 02-16-2009, 10:40 PM

hes right yoda, dont laugh. i used a 3" housing to try and see if a 3" intake would work...it doesnt

BlackMan_Ink · 02-18-2009, 11:13 PM

I got an AFE intake and I am having the same problems I went over the hoses with a fine tooth comb, and the only thing I can think of is that the plastic elbow is leaking air, I'm pretty sure I put the MAF sensor on tight, even tho I had to get some extra washers to get it to stop wobbling on the housing. I'm going to add sealant to the hose and elbow, hopefully that solves the problem. Any suggestions on where I should be looking?

YarisSedan · 02-18-2009, 11:17 PM

What CAI intake brand did you use. I never heard of any intake besides one on ebay that would require you to use sealant on it.

BlackMan_Ink · 02-18-2009, 11:30 PM

i got an AFE intake, I got it from a reputable parts store in Burbank, it came with all the parts and had all the emblems molded on the parts, it's legit... but for some reason it just didn't fit perfect.

BlackMan_Ink · 02-18-2009, 11:30 PM

i got the one you got the AFE stage 2 intake... or at least thas wut the box said... =)

kustom play · 02-18-2009, 11:35 PM

bad maf would stall the car and not even run

check the tightness of the filter and tube

mikenacarato · 02-18-2009, 11:44 PM

Quote:

Originally Posted by kustom play

bad maf would stall the car and not even run

check the tightness of the filter and tube

so will an incorrect diameter MAF tube.

LBjoe · 02-18-2009, 11:41 PM

If there is a leak before to the MAF it can read that amount of air and correct the fuel still could cause a rich condition but i dont believe that would throw a code.. NOW if it's after the MAF you have un metered air reaching the engine causing a lean condition and that will pop a CEL quickly... Thus i'd be contacting AFE asking as to why the MAF housing is not providing a correct fit as well as making sure you have not damaged the fillament on the MAF by rigging it in the intake with washers they are kinda touchy oil from our hands can cause them to trip a light... just my two cents.

BlackMan_Ink · 02-19-2009, 12:04 AM

thanx, I'm going to give it another once over and hopefully it won't go off on the ride home.

BlackMan_Ink · 02-20-2009, 09:31 PM

I am still getting a CEL, but thanx to Garm I now know what the problem is(the bolts that came with the sensor are too long and the MAF is not sitting on the intake properly causing a leak) and will have it fixed A.S.A.P. Thank you again to all, for the help.

cali yaris · 02-21-2009, 03:13 AM

Yes - I got one right!

Great to meet you today.

marcus · 02-21-2009, 12:07 PM

yup its the diameter..i ran into this problem.. 3 inch wont work at all..i believe its 2 1/4 inch is the stock... but i ran into someone that had bigger diameter..dont know how he did it..he said it was the distance between the maf and the filter.

02-18-2009, 11:13 PM	#2
BlackMan_Ink View User's Garage Drives: 07 Yaris, 4dr Daily Driver Join Date: Aug 2007 Location: Cerritos, CA Posts: 31	I got an AFE intake and I am having the same problems I went over the hoses with a fine tooth comb, and the only thing I can think of is that the plastic elbow is leaking air, I'm pretty sure I put the MAF sensor on tight, even tho I had to get some extra washers to get it to stop wobbling on the housing. I'm going to add sealant to the hose and elbow, hopefully that solves the problem. Any suggestions on where I should be looking? __________________ Live, Life, Lavishly!

02-18-2009, 11:30 PM	#4
BlackMan_Ink View User's Garage Drives: 07 Yaris, 4dr Daily Driver Join Date: Aug 2007 Location: Cerritos, CA Posts: 31	i got an AFE intake, I got it from a reputable parts store in Burbank, it came with all the parts and had all the emblems molded on the parts, it's legit... but for some reason it just didn't fit perfect. __________________ Live, Life, Lavishly!

02-18-2009, 11:30 PM	#5
BlackMan_Ink View User's Garage Drives: 07 Yaris, 4dr Daily Driver Join Date: Aug 2007 Location: Cerritos, CA Posts: 31	i got the one you got the AFE stage 2 intake... or at least thas wut the box said... =) __________________ Live, Life, Lavishly!

02-18-2009, 11:41 PM	#8
LBjoe View User's Garage Drives: Red LB Join Date: Feb 2009 Location: KCMO Posts: 22	If there is a leak before to the MAF it can read that amount of air and correct the fuel still could cause a rich condition but i dont believe that would throw a code.. NOW if it's after the MAF you have un metered air reaching the engine causing a lean condition and that will pop a CEL quickly... Thus i'd be contacting AFE asking as to why the MAF housing is not providing a correct fit as well as making sure you have not damaged the fillament on the MAF by rigging it in the intake with washers they are kinda touchy oil from our hands can cause them to trip a light... just my two cents. __________________ TRD

02-19-2009, 12:04 AM	#9
BlackMan_Ink View User's Garage Drives: 07 Yaris, 4dr Daily Driver Join Date: Aug 2007 Location: Cerritos, CA Posts: 31	thanx, I'm going to give it another once over and hopefully it won't go off on the ride home. __________________ Live, Life, Lavishly!

02-16-2009, 10:40 PM	#1
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	hes right yoda, dont laugh. i used a 3" housing to try and see if a 3" intake would work...it doesnt

02-18-2009, 11:17 PM	#3
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	What CAI intake brand did you use. I never heard of any intake besides one on ebay that would require you to use sealant on it.

02-18-2009, 11:35 PM	#6
kustom play pink wheels are cool View User's Garage Drives: 07 liftback Join Date: Oct 2008 Location: Phoenix Posts: 1,407	bad maf would stall the car and not even run check the tightness of the filter and tube

02-20-2009, 09:31 PM	#10
BlackMan_Ink View User's Garage Drives: 07 Yaris, 4dr Daily Driver Join Date: Aug 2007 Location: Cerritos, CA Posts: 31	problem solved I am still getting a CEL, but thanx to Garm I now know what the problem is(the bolts that came with the sensor are too long and the MAF is not sitting on the intake properly causing a leak) and will have it fixed A.S.A.P. Thank you again to all, for the help. __________________ Live, Life, Lavishly!

02-21-2009, 03:13 AM	#11
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	Yes - I got one right! Great to meet you today. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

02-21-2009, 12:07 PM	#12
marcus toyota View User's Garage Drives: 2007 Yaris RS Blazed Join Date: Oct 2006 Location: toronto, canada Posts: 3,637	yup its the diameter..i ran into this problem.. 3 inch wont work at all..i believe its 2 1/4 inch is the stock... but i ran into someone that had bigger diameter..dont know how he did it..he said it was the distance between the maf and the filter.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Simota Carbon Charger Cold Air Intake	lilredrocket	Performance Modifications	18	04-13-2009 04:16 AM
Intake Systems Decision Maker..	Blenjar	Performance Modifications	25	09-15-2007 11:07 PM
guess what I'm waiting for and how much I paid?	Ric n Sov's Vitz RS	General Yaris / Vitz Discussion	27	06-27-2007 08:36 PM
problem with cold air intake	skc	Canada	24	06-18-2007 08:34 PM
Cold Air Intake vs. Short Ram Intake	nevermorez	Performance Modifications	1	01-24-2007 05:25 PM