Installing a remote starter without cutting factory wires?

[CTScott]

Originally Posted by manborn

was looking for the positive parking light

I used the parking light (-) output, but from another post:

Parking Lights+ green + fuse box, top L, 30 pin plug, pin 29

[manborn]

Originally Posted by CTScott

I used the parking light (-) output, but from another post:

Parking Lights+ green + fuse box, top L, 30 pin plug, pin 29

found on another post, Brake Switch - Light Green - At Switch Above Brake Pedal

did you mean park lights is a green wire, by the fuse box, top left...?

[CTScott]

Originally Posted by manborn

found on another post, Brake Switch - Light Green - At Switch Above Brake Pedal

did you mean park lights is a green wire, by the fuse box, top left...?

Correct on both - Brake switch is either green wire on the connector on top of the brake pedal, and parking lights (+ output) is the light green wire in terminal 29 of the 30 pin connector 4A on the top left of the under-dash fuse panel: