need help: foglight indicator - where are the wires?

[1NZYaris1]

Originally Posted by CTScott

If you pop the combination meter assembly off, it has two connectors D1 and D2. D1 is a 24 pin connector and D2 (the one you want) is a 16 pin connector.

By the way, I believe that Pin 3 on the stalk connector only works if you are using a fog light switch equipped stalk.

Not true at all , this is the way mine are wired, and they work great

[CTScott]

Originally Posted by 1NZYaris1

Not true at all , this is the way mine are wired, and they work great

You installed the relay in the D46 position for that to work. The question is if his kit has the relay that installs there or if it has the external relay.

So, you are definitely correct that the stalk is not required, but the relay in that position, or the external relay wired through that position would be required.

The kit that I bought included an external relay, so I wired the indicator directly to the combination meter.

Here is the EWD for the fogs, which shows pin 3 and 4 on the upper left. The Fog light relay (at D46) is at the upper right. Its output feeds the fog lights and the combination meter indicator (center).

[1NZYaris1]

the diagrames above is for useing the switch supplied with the kit .
if you want to use the factory combo switch all you need is the relay
(factory , or aftermarket) to plug into factory position as per diagrames.

[mrbond]

Originally Posted by 1NZYaris1

the diagrames above is for useing the switch supplied with the kit .
if you want to use the factory combo switch all you need is the relay
(factory , or aftermarket) to plug into factory position as per diagrames.

So, let's see if I understand this. If I wanted to use the factory stalk instead of the little button that goes into the console, then all I need to do is wire up the fog lights, put the wire into the fuse box in the engine bay, and then put the relay where it's supposed to go? So I wouldn't even need that extra wiring harness for the cabin? If so, that's fantastic.

[Meteorite_Marty]

Originally Posted by PK198105

exactly the Yaris is already prewired, the only harness you need is the one to connect the Fogs together and to the fuse box in the engine bay.

Purchase the foglight stalk. The install is SOOOOOO much simpler and no messing with firewall and interior wiring. Plus, the fog light stalk is how it would come if you ordered your car with fogs from Toyota factory directly.

[Meteorite_Marty]

Originally Posted by mrbond

So, let's see if I understand this. If I wanted to use the factory stalk instead of the little button that goes into the console, then all I need to do is wire up the fog lights, put the wire into the fuse box in the engine bay, and then put the relay where it's supposed to go? So I wouldn't even need that extra wiring harness for the cabin? If so, that's fantastic.

Purchase the foglight stalk, I don't think the default headlight stalk can handle fog light control. The install is SOOOOOO much simpler and no messing with firewall and interior wiring. Plus, the fog light stalk is how it would come if you ordered your car with fogs from Toyota factory directly.

[mrbond]

Originally Posted by Meteorite_Marty

Purchase the foglight stalk, I don't think the default headlight stalk can handle fog light control. The install is SOOOOOO much simpler and no messing with firewall and interior wiring. Plus, the fog light stalk is how it would come if you ordered your car with fogs from Toyota factory directly.

For sure, I'm definitely doing this. I don't like messing with electrical stuff - too complicated.

[Meteorite_Marty]

Originally Posted by mrbond

For sure, I'm definitely doing this. I don't like messing with electrical stuff - too complicated.

This post gives links to order the RELAY and FOG LIGHT STALK


http://www.yarisworld.com/forums/sho...og+light+stalk