1NZ-FXE inake manifold ?

[Bluevitz-rs]

The first picture is from a Celica, the second is from a Matrix or Vibe. You'd want the one from the Matrix/Vibe as it would be the closest to stock setup.

Edit, but you'd want the Celica manifold as it comes out straight vs at an angle.

[ddongbap]

Originally Posted by Bluevitz-rs

The first picture is from a Celica, the second is from a Matrix or Vibe. You'd want the one from the Matrix/Vibe as it would be the closest to stock setup.

Edit, but you'd want the Celica manifold as it comes out straight vs at an angle.

Lolvibe. The Matrixclone.

[Parmas]

Originally Posted by Bluevitz-rs

The first picture is from a Celica, the second is from a Matrix or Vibe. You'd want the one from the Matrix/Vibe as it would be the closest to stock setup.

Edit, but you'd want the Celica manifold as it comes out straight vs at an angle.

Let's get this straight...
The intake manifolds are the same everything right?
Only throttle body is different? Are they the same size?
Could be that throttle bodies are interchangable?

Yes I was thinking about the 2nd aswell....

RE: Matrix throttle body angle.... I think it is better like that for me due to the limited space into the engine bay although a straight one is cleaner!

If I decide to use the celica throttle body, Can I use the same throttle cable just at a different route?

[Bluevitz-rs]

Originally Posted by Parmas

Let's get this straight...
The intake manifolds are the same everything right?
Only throttle body is different? Are they the same size?
Could be that throttle bodies are interchangable?

Yes I was thinking about the 2nd aswell....

RE: Matrix throttle body angle.... I think it is better like that for me due to the limited space into the engine bay although a straight one is cleaner!

If I decide to use the celica throttle body, Can I use the same throttle cable just at a different route?

The Celica manifold TB mount is strait and the Matrix is up on the angel. The Celica Throttle Cable is routed along the firewall and around the motor, the Matrix is like the Echo/1st gen Yaris.

So for the same setup as the Echo, you'd want the Celica manifold and the Matrix TB.

[Parmas]

Originally Posted by Bluevitz-rs

So for the same setup as the Echo, you'd want the Celica manifold and the Matrix TB.

Can you confirm that the celica and matrix manifolds are the same ? (not including throttle body)

[Parmas]

Originally Posted by Bluevitz-rs

So for the same setup as the Echo, you'd want the Celica manifold and the Matrix TB.

So a Matrix intake and a Matrix TB would be good since the celica manifold is the same

Cheers man