More cruise control - Toyota Yaris Forums

Bladerunner · 08-01-2010, 07:11 AM

Hi CTScott
I have read your help articles with great interest. They are fantastic. With reguard to my situation, I forgot to mention this cruise control is not for a Yaris. It's for a Toyota Blade which is very similar to the Auris or Corolla Hatch. The part numbers are identicle. If you go to the supplied link http://www.toyotaownersclub.com/foru...howtopic=86751 you will notice that there are three plugs. My problem is that in my case. the right hand plug exists but there are no pins inside. Do you know whether it is possible to add them. As I explained earlier, the instrument panel has the "cruise" light but at this stage I am not sure if the cable from the back of the clock spring to the ECM exists or if it's possible to add it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cruise control install 2009 Yaris 3 door	PeteZNY	DIY / Maintenance / Service	125	03-31-2024 10:22 AM
DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag	CTScott	DIY / Maintenance / Service	307	04-04-2023 04:43 AM
OEM Steering wheel with cruise control?	suckerface	Cosmetic Modifications (Exterior/Interior)	9	07-25-2010 09:40 PM
Cruise Control - Again!	CB900F2	DIY / Maintenance / Service	47	06-17-2010 07:29 PM
Cruise control vs MPG	YarisOwnersDad	Fuel Economy Forum	15	05-29-2009 04:55 PM

08-01-2010, 07:11 AM	#4
Bladerunner Drives: Toyota Blade Join Date: Jul 2010 Location: New Zealand Posts: 4	Hi CTScott I have read your help articles with great interest. They are fantastic. With reguard to my situation, I forgot to mention this cruise control is not for a Yaris. It's for a Toyota Blade which is very similar to the Auris or Corolla Hatch. The part numbers are identicle. If you go to the supplied link http://www.toyotaownersclub.com/foru...howtopic=86751 you will notice that there are three plugs. My problem is that in my case. the right hand plug exists but there are no pins inside. Do you know whether it is possible to add them. As I explained earlier, the instrument panel has the "cruise" light but at this stage I am not sure if the cable from the back of the clock spring to the ECM exists or if it's possible to add it.