Need Spring Advice - Toyota Yaris Forums

Imagine · 03-10-2011, 01:39 PM

I personally like to measure from the center of the wheel well before and after. Of course, you have to use the same wheels, etc. lol

annn · 03-10-2011, 02:06 PM

I started measure at stock springs installed. I measured over a few months.

I went from a known spot on a level floor to the bottom of the fender lip, with a tape measure.

So mine went from stock height to 1.8 inches lower from stock measurement.

WeeYari · 03-10-2011, 06:17 PM

Quote:

Originally Posted by annn

So mine went from stock height to 1.8 inches lower from stock measurement.

That is one hell of a lot of settling for a spring with a published drop of 1 inch.

annn · 03-10-2011, 06:30 PM

Yea in fact it dropped more than my partner initially wanted, shes still a bit iffy on it.

195 60 15 barely fit..

thebarber · 03-10-2011, 02:27 PM

Quote:

Originally Posted by Imagine

I personally like to measure from the center of the wheel well before and after. Of course, you have to use the same wheels, etc. lol

um, not really

thats why you measure center for wheel to top of the fender opening...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another rear spring option! Honda Fit springs!!	kngrsll	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	29	10-23-2009 06:02 PM
Hyperco 5.5" single pigtail rear spring test	kngrsll	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	33	06-15-2009 11:11 AM
Track Suspension	id3379	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	85	06-11-2009 06:59 PM
Spring Advice.	MAD DOG	Performance Modifications	7	03-01-2009 11:14 AM
shock/sturt and spring advice	cdmyaris	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	4	08-08-2007 12:18 AM

03-10-2011, 01:39 PM	#1
Imagine Insert sarcasm here. View User's Garage Drives: 2009 Black Pearl Sand 3Dr Join Date: May 2007 Location: Ohio Posts: 241	I personally like to measure from the center of the wheel well before and after. Of course, you have to use the same wheels, etc. lol

03-10-2011, 02:06 PM	#2
annn ヤリスワールド Drives: 2008 HB Join Date: May 2010 Location: seattle Posts: 380	I started measure at stock springs installed. I measured over a few months. I went from a known spot on a level floor to the bottom of the fender lip, with a tape measure. So mine went from stock height to 1.8 inches lower from stock measurement.

03-10-2011, 06:30 PM	#4
annn ヤリスワールド Drives: 2008 HB Join Date: May 2010 Location: seattle Posts: 380	Yea in fact it dropped more than my partner initially wanted, shes still a bit iffy on it. 195 60 15 barely fit..