Yaris Sedan Deadening and Sound system upgrade

[derickveliz2]

Originally Posted by TOLMACH

tiny holes spaced 5 milimiteters apart around the whole perimeter will save you ))

I am in russia at the moment - I can easily buy here the regular epoxy rather than fast drying fiberglass resin becasue it is way stronger in term of adhesion (though dries very slowly - around 24 hours per layer) - I normally try to use epoxy for such strange plastic parts (sometimes i start thinking it is not pure plastic but some mixture of plastic and rubber)

I do not think silicone will help you in any eay- concentrate on building the proper outer shell of the pod

Again, sorry for being stubborn - think about covering the whole piece (with lots of prior sanding with harsh sandpaper) can be a solution to your "applied torque and crashed" problem

As requested, I wish you best of luck!! ))

Yes, I did punch a bunch of holes and it's drying right now, we'll see tomorrow. Thank you.

I'm using Silicone inside! not outside, I know Glass can get very strong but also too hard it would crack at some point, so the silicone inside around the baffle. (this is just me, who knows if it helps or not)

I'm really thinking about covering everything, but we'll see (I feel lazy now too much work jeje)

So you are in Russia? do you have a picture of your Yaris over there?

Thanks

D.