New fog lights installed

[1.5]

I had to go through my firewall with my eBay fogs gq. I remember you saying you weren't comfortable with rolling/pulling fenders so this may not be something you want to undertake. It took me >5 hours but I'm not the best at wiring/electrical either.

[CTScott]

Originally Posted by 1.5

I had to go through my firewall with my eBay fogs gq. I remember you saying you weren't comfortable with rolling/pulling fenders so this may not be something you want to undertake. It took me >5 hours but I'm not the best at wiring/electrical either.

Whereas I installed a set of Micro Image ones on Crashy2 last night in less than an hour. That involves a couple of tricks though, that I've leaned over time, like only disconnecting the top of the bumper, rather than pulling the bumper entirely off.

[1.5]

O that's a good one Scott I will try that next time.

[Kaotic Lazagna]

I'm a little confused, here is a "stock" photo of a 2010 sedan:



Here is my 2007 sedan:




The 2010's bezel looks completely different from mine.

[CTScott]

Originally Posted by Kaotic Lazagna

I'm a little confused, here is a "stock" photo of a 2010 sedan:



Here is my 2007 sedan:




The 2010's bezel looks completely different from mine.

That's not a plain 2010, it's a 2010 S, which would come with fogs from the factory. The non-S 2010's had the same fog light trim as the pre-2010s.

[Kaotic Lazagna]

Originally Posted by CTScott

That's not a plain 2010, it's a 2010 S, which would come with fogs from the factory. The non-S 2010's had the same fog light trim as the pre-2010s.

lol, wow, an S model that's actually quite different than the other trim levels.

So all non-S sedans are basically the same with the exception of the front top grill?

[1.5]

That and wheels/hubcaps are the only differences I've noticed.

[cali yaris]

Does anyone on here have an 'S' sedan? I've never seen one in person.

[g.q.vios]

Originally Posted by CTScott

Yes. But, the difference between these $40 ones and the MicroImage $100 kit is that the MicroImage one includes the wiring pieces developed by Ray (1NZYaris1), which allow you to install them using the existing factory wiring through the firewall.

If you are installing them yourself this saves a large amount of work, as the $40 kit will require you to pull the battery and wiper tray to get at the firewall grommet to run the harness through the firewall.

To modify the $40 kit to use the factory wiring you would need to purchase the two pins for the under-hood fuse panel connector ($12+ each) and the fog light relay for the under-dash fuse panel ($20).

yeah ur right ill just fork out the 100$ to M.I and support or guys

[Kaotic Lazagna]

Originally Posted by cali yaris

Does anyone on here have an 'S' sedan? I've never seen one in person.

Only one I knew of was Adejong (sp?). He had Work CR-Kai wheels, Bride seats, and some other goodies. He since parted out his car and...well, not sure. lol

[Kaotic Lazagna]

His was an 09 S sedan

http://www.yarisworld.com/forums/showthread.php?t=28385

[g.q.vios]

Originally Posted by Kaotic Lazagna

Only one I knew of was Adejong (sp?). He had Work CR-Kai wheels, Bride seats, and some other goodies. He since parted out his car and...well, not sure. lol

I've never seen one ethier!!!!

[g.q.vios]

Originally Posted by 1.5

I had to go through my firewall with my eBay fogs gq. I remember you saying you weren't comfortable with rolling/pulling fenders so this may not be something you want to undertake. It took me >5 hours but I'm not the best at wiring/electrical either.

Nah the wiring part i got im good with the electrical I have my amp cable runing through the firewall... My day time running lights i have them hooked up to the parking lights so when ever im driving i just click once for day use and twice for night use... I love messing with wires its fun.. I wired my whole car audio system myself too... It's my first love...

[808Yaris07]

Hey guys...so for my 2007..best bet is to get the 100.00 kit? I don't have fogs in mine right now..

[sickpuppy1]

Now I bought a set off ebay, but now instructions on wiring hook up. Has the wiring with plugs on ends but no idea where your supposed to hook it all to. Is the spot for sedan switch supposed to be on center console right behind the traction control button? Looks like a switch knock out is there. I'm sure I can fumble through it. looking for more confirmed Ideas of where to go with it. Where is the factory wiring hook up at firewall?