tooter's next manifold adventure... - Toyota Yaris Forums

ezhacker1 · 07-30-2014, 10:22 PM

I was able to install the spacer and keep the heat shield on the AFE intake.

Did an initial test 6 mile test run city/hwy after ECU reset just to make sure car runs fine.

1. Idle warmed up RPM is lowered ~25rpm from 620 to 595.
2. Blipping the throttle is sensitive, like having the throttle controller on.
3. Letting the engine lug the car forward is much stronger. Sure the car is shaking but works stronger on my slight inclined driveway.
4. Although idle RPM is lowered, fuel consumption/hour hasn't changed, still 0.125/HR

Manual Transmission
Related Mods: AFE Intake, DC Sports axle back

07-30-2014, 10:22 PM	#32
ezhacker1 Drives: Decepticon - Ravage Join Date: Nov 2008 Location: San Francisco Posts: 1,464	I was able to install the spacer and keep the heat shield on the AFE intake. Did an initial test 6 mile test run city/hwy after ECU reset just to make sure car runs fine. 1. Idle warmed up RPM is lowered ~25rpm from 620 to 595. 2. Blipping the throttle is sensitive, like having the throttle controller on. 3. Letting the engine lug the car forward is much stronger. Sure the car is shaking but works stronger on my slight inclined driveway. 4. Although idle RPM is lowered, fuel consumption/hour hasn't changed, still 0.125/HR Manual Transmission Related Mods: AFE Intake, DC Sports axle back __________________ Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274 Last edited by ezhacker1; 07-31-2014 at 08:30 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tooter's manifold adventure...	tooter	Performance Modifications	1465	07-31-2014 09:11 PM
FS : GT2560R Turbo + Manifold	Parmas	Items for Sale by private party	0	08-24-2012 09:35 AM
homemade intake manifold	ttr125fan09	Performance Modifications	1	02-17-2012 02:09 AM
Turbo Manifold thread	Sabretooth	Forced Induction Forum	78	05-22-2009 07:52 AM