E85 All Motor Build

[Fluxtasy]

Originally Posted by fnkngrv

And the connector is the same as on the standard 1nz harness correct?

I think the connector should be the same.

Yeah Okada are costly but there are other options. T.M. Works specialize in ignition tuning products. I'm using their basic harness:
http://tmworks-web.jp/products/dph_eng.htm

or you can go further with 16v: http://tmworks-web.jp/products/alpha_eng.htm
and even a few more stages of upgrades.

Their full stage upgrades might be even more costly vs Okada and the debate is still going on which is better.