Exhaust pipe size - Toyota Yaris Forums

gwasabi · 11-28-2008, 04:00 AM

Does anyone know the Stock exhaust pipe size? I was planning to do the secondary cat delete and wanted to know what size pipe i need to weld on.

thebarber · 11-28-2008, 05:48 AM

1.75"

pretty sure we only have one cat and the resonator after it....

and from what magnaflow was saying, the cat and res are 2" straight thru

so if youre staying n/a id just do a res-back exhaust at 2" diameter...

cali yaris · 11-28-2008, 12:52 PM

We have two cats (USDM). The O2 sensor is right between them, then after the 2nd cat comes the resonator.

josevenezolano · 11-28-2008, 12:59 PM

Yes, My Yaris is made in Japan and it has two cats.

thebarber · 11-28-2008, 01:57 PM

Quote:

Originally Posted by cali yaris

We have two cats (USDM). The O2 sensor is right between them, then after the 2nd cat comes the resonator.

oh, didnt know that...i guess i havent really looked under the car too thuroughly....

gwasabi · 11-28-2008, 02:21 PM

Hmmm.....REally our pipes are that small? I plan on going turbo eventually so maybe I'll just keep the cat.....plus I only have 3" extra pipe anyway. I don't think I have a resonator. I have a greddy tic so just a muffler. Maybe when I end up turboing my car I'll just delete everything and weld the muffle back on to a 3" pipe. What do you guys think?

Split · 11-28-2008, 02:55 PM

i can't imagine piping being expensive. its really easy to delete that second cat, and if you're really ambitious you can remove the resonator right next to it as well, you just need to weld a new hanger on the pipe after.

gwasabi · 11-28-2008, 03:32 PM

I don't think we have a resonator.... I thought the resonator is the part in the back right before the outlet. As far as I know it goes cat, 02 sensor, cat, resognator, then tip

right now I think mine is cat, 02 sensor, cat, muffler.

From what I know the axle back exhausts gets rid of the resonator. I dunno maybe I'll just work on a straight pipe for once i get a turbo

Kaotic Lazagna · 11-28-2008, 04:46 PM

Axle backs just replace the portion of the exhaust system at the rear axle. Magnaflows' "cat-back" is like my custom set up, it actually starts from the end of the resonator (resonator back).

Kaotic Lazagna · 11-28-2008, 04:47 PM

Quote:

Originally Posted by Split

i can't imagine piping being expensive. its really easy to delete that second cat, and if you're really ambitious you can remove the resonator right next to it as well, you just need to weld a new hanger on the pipe after.

Piping prices depend on the material used; i.e. steel, titanium, etc, and also the method used to bend them; i.e. crush bends or mandrel bends (more expensive).

Kaotic Lazagna · 11-28-2008, 04:49 PM

Quote:

Originally Posted by gwasabi

Does anyone know the Stock exhaust pipe size? I was planning to do the secondary cat delete and wanted to know what size pipe i need to weld on.

Honestly, if you are going to delete the second cat, might as well do away with both. I was going to do that, and the shop gave me a warning that if a highway patrol pulls me over and see's that there's only one cat, then they can impound my car. But then again, how do they know that our car comes with a primary and secondary cat?

cali yaris · 11-28-2008, 05:39 PM

The resonator is the long tube right under the middle of the car, after the 2nd cat. The part in back before the tip is the muffler.

header - cat - O2 sensor - cat - resonator - piping - muffler - tip

Take a look at the Nitto midpipe, it simulates your stock set up:

TheSilkySmooth · 11-28-2008, 06:13 PM

I thought all lambda control cars are header-02-cat-02-cat-resonator-muff. Some people call the first 02 a mixture sensor, since ours is the megadollar 0-5volt wideband not the 0-1 v wave/pulse. You gotta measure the mixture b4 its in a cat so the ECU knows the mixture. Remember, this is a 1.5L LOW rEVVING motor not a honda vtec that spins to 7500+ A 2" DIA system is plenty too big enough to kill most power under 3500 rpm.

Sonja's Bro

WolfWings · 11-28-2008, 06:18 PM

The long-tube exhaust header Richard's been testing shows our engine benefits up to around 2.25" exhaust actually, for NA at least. No gains (no mention of losses either) going up to 2.5", but yeah, unless you're going turbo no reason to go over 2.25" it looks like.

djhuddy2442 · 04-17-2013, 01:39 PM

Quote:

Originally Posted by thebarber

1.75"

pretty sure we only have one cat and the resonator after it....

and from what magnaflow was saying, the cat and res are 2" straight thru

so if youre staying n/a id just do a res-back exhaust at 2" diameter...

is the 1.75 the inside or outside diameter???

thebarber · 04-19-2013, 02:03 PM

I.D.

Jason@SportsCar · 04-19-2013, 02:26 PM

Quote:

Originally Posted by cali yaris

The resonator is the long tube right under the middle of the car, after the 2nd cat. The part in back before the tip is the muffler.

header - cat - O2 sensor - cat - resonator - piping - muffler - tip

Take a look at the Nitto midpipe, it simulates your stock set up:

A better image to go with your description.

#1 header
#5 resonator
#10 muffler

The two cats are just ahead of the resonator in this illustration.

djhuddy2442 · 04-20-2013, 10:04 AM

so what would be the O.D. of the pipe??

11-28-2008, 05:48 AM	#2
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	1.75" pretty sure we only have one cat and the resonator after it.... and from what magnaflow was saying, the cat and res are 2" straight thru so if youre staying n/a id just do a res-back exhaust at 2" diameter... __________________

11-28-2008, 12:52 PM	#3
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	We have two cats (USDM). The O2 sensor is right between them, then after the 2nd cat comes the resonator. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

11-28-2008, 05:39 PM	#12
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	The resonator is the long tube right under the middle of the car, after the 2nd cat. The part in back before the tip is the muffler. header - cat - O2 sensor - cat - resonator - piping - muffler - tip Take a look at the Nitto midpipe, it simulates your stock set up: __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

11-28-2008, 06:18 PM	#14
WolfWings View User's Garage Drives: Silver 2007 3Dr - Gryph Join Date: Jul 2007 Location: Kansas City, MO, USA Posts: 310	The long-tube exhaust header Richard's been testing shows our engine benefits up to around 2.25" exhaust actually, for NA at least. No gains (no mention of losses either) going up to 2.5", but yeah, unless you're going turbo no reason to go over 2.25" it looks like. __________________

04-19-2013, 02:03 PM	#16
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	I.D. __________________

11-28-2008, 04:00 AM	#1
gwasabi View User's Garage Drives: 07 Blazing Blue LB Join Date: Jun 2007 Location: Honolulu, Hawaii Posts: 692	Exhaust pipe size Does anyone know the Stock exhaust pipe size? I was planning to do the secondary cat delete and wanted to know what size pipe i need to weld on.

11-28-2008, 12:59 PM	#4
josevenezolano View User's Garage Drives: Toyota Yaris HB 2008 Join Date: Oct 2008 Location: Venezuela Posts: 173	Yes, My Yaris is made in Japan and it has two cats.

11-28-2008, 02:21 PM	#6
gwasabi View User's Garage Drives: 07 Blazing Blue LB Join Date: Jun 2007 Location: Honolulu, Hawaii Posts: 692	Hmmm.....REally our pipes are that small? I plan on going turbo eventually so maybe I'll just keep the cat.....plus I only have 3" extra pipe anyway. I don't think I have a resonator. I have a greddy tic so just a muffler. Maybe when I end up turboing my car I'll just delete everything and weld the muffle back on to a 3" pipe. What do you guys think?

11-28-2008, 02:55 PM	#7
Split Drives: 2008 Yaris Sedan Join Date: Oct 2008 Location: Edmonton Posts: 393	i can't imagine piping being expensive. its really easy to delete that second cat, and if you're really ambitious you can remove the resonator right next to it as well, you just need to weld a new hanger on the pipe after.

11-28-2008, 03:32 PM	#8
gwasabi View User's Garage Drives: 07 Blazing Blue LB Join Date: Jun 2007 Location: Honolulu, Hawaii Posts: 692	I don't think we have a resonator.... I thought the resonator is the part in the back right before the outlet. As far as I know it goes cat, 02 sensor, cat, resognator, then tip right now I think mine is cat, 02 sensor, cat, muffler. From what I know the axle back exhausts gets rid of the resonator. I dunno maybe I'll just work on a straight pipe for once i get a turbo

11-28-2008, 04:46 PM	#9
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	Axle backs just replace the portion of the exhaust system at the rear axle. Magnaflows' "cat-back" is like my custom set up, it actually starts from the end of the resonator (resonator back).

11-28-2008, 06:13 PM	#13
TheSilkySmooth Drives: 08 3DR 5M Bayou Blue; 09 Fos Join Date: Oct 2008 Location: New Hampshire Posts: 622	I thought all lambda control cars are header-02-cat-02-cat-resonator-muff. Some people call the first 02 a mixture sensor, since ours is the megadollar 0-5volt wideband not the 0-1 v wave/pulse. You gotta measure the mixture b4 its in a cat so the ECU knows the mixture. Remember, this is a 1.5L LOW rEVVING motor not a honda vtec that spins to 7500+ A 2" DIA system is plenty too big enough to kill most power under 3500 rpm. Sonja's Bro

04-20-2013, 10:04 AM	#18
djhuddy2442 View User's Garage Drives: 2008 toyota yaris hatchback Join Date: Dec 2012 Location: pittsburgh pa Posts: 95	so what would be the O.D. of the pipe??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Installing Greddy TI-C Exhaust System	redyaris	DIY / Maintenance / Service	13	08-01-2009 04:05 AM
Exhaust pipe gasket	umm_bacon	DIY / Maintenance / Service	1	09-23-2007 07:30 PM
white residue in exhaust pipe	yuiedie	DIY / Maintenance / Service	7	09-21-2007 07:17 PM
Exhaust Pipe Size (Tamaño del tubo de escape)	carlosh	Central and South America	11	08-02-2007 04:15 PM
GReddy prototype = Free Exhaust!	Chris_Lum	California	30	02-27-2007 10:13 PM