Spring, shocks/struts, and rear sway bar compatibility?

[Neinris]

I bought my Bilstein B8s from RockAuto.com, and they're cheaper compare to that eBay seller, but you'd have to pay for shipping. Ironically, I bought the Tein's lowering springs from eBay, for only $120.

[stiglitz]

Originally Posted by WeeYari

In a nutshell, engine, drivetrain, brakes, suspension all the same gen2 to gen3.

Originally Posted by mitch9521

Its too bad cause these cars are super light and tossable, they're considerably lighter than Honda Fits and those have lots of aftermarket support.

Originally Posted by Neinris

I bought my Bilstein B8s from RockAuto.com

Just wanted to update everyone on this thread: I completed the install and all parts listed in the original post bolted right up without a problem (NOTE: I went with Megan Racing springs, not Tein). Suspension components are indeed the same from Gen 2 to Gen 3. I’ll create a thread and post photos another day. Thanks for your help!

[Neinris]

Can't wait to see the pics. I haven't had the chance to do it, but I'll be trimming the bump stop by half an inch. I felt a slight bottom out when I hit a bump going 70MPH.

Does anyone know the spring rates for the Megan Racing springs?

According to the Tein website, the S.Tech springs that I have are 3 kgf/mm on the front and 3.5 kgf/mm on the rear.

https://www.tein.com/tech_info/l70.html

[WeeYari]

Originally Posted by Neinris

Does anyone know the spring rates for the Megan Racing springs?

https://www.yarisworld.com/forums/sh...6&postcount=20

[Neinris]

Originally Posted by WeeYari

https://www.yarisworld.com/forums/sh...6&postcount=20

Thanks WeeYari!

Just to put it out for everyone without having to click at the links provided, the Tein S.Tech are 170lbs/in in the front and 200lbs/in in the rear, while the Megan Racing Springs are 126lbs/in and 140lbs/in respectively.